D-Link TM DES-6500, Справочное руководство по интерфейсу командной строки

Страница: 189 / 267

DES-6500
config route redistribute dst ospf
redistributed.
Parameters
src
−
Allows the selection of the protocol of the source device.
mettype
−
allows the selection of one of the methods for calculating the
metric value. Type-a calculates the metric (for RIP to OSPF) by adding
the destination’s interface cost to the metric entered in the Metric field.
ExtType2 uses the metric entered in the Metric field without change.
This field applies only when the destination field is OSPF.
metric <value 0 - 16777214>
−
Allows the entry of an OSPF interface
cost. This is analogous to a Hop Count in the RIP routing protocol.
Restrictions Only administrator-level users can issue this command.
Routing information source
−
RIP: the Static Route table, and the Local interface routing information. Routing information
will be redistributed to OSPF. The following table lists the allowed values for the routing metrics and the types (or forms) of
the routing information that will be redistributed.
Route Source Metric Metric Type
RIP 0 to 16777214 mettype 1
mettype 2
Static 0 to 16777214 mettype 1
mettype 2
Local 0 to 16777214 mettype 1
mettype 2
Allowed Metric Type combinations are mettype 1 or mettype 2 . The metric value 0 above will be redistributed in OSPF as
the metric 20 .
Example Usage:
To configure route redistributions:
config route redistribute dst rip
Purpose Used to configure route redistribution from OSPF to RIP.
Syntax config route redistribute dst rip src [local|static|ospf
{all|internal|external|extType1|extType2|inter+e1|inter+e2}] {metric
<value 0-16>}
Description
Route redistribution allows routers on the network
−
that are running
different routing protocols to exchange routing information. this is
accomplished by comparing the routes stored in the various router’s
routing tables and assigning appropriate metrics. this information is then
exchanged among the various routers according to the individual routers
current routing protocol. The switch can redistribute routing information
DES6500:4#config route redistribute dst ospf src rip mettype
1 metric 2
Command: config route redistribute dst ospf src rip mettype 1
metric 2
Success.
DES-6500:4#