D-Link TM DES-6500, Справочное руководство по интерфейсу командной строки

Страница: 170 / 267

DES-6500:4# config traffic_segmentation 1-10 forward_list 11-
15
Command: config traffic_segmentation 1-10 forward_list 11-
15
Success.
DES-6500:4#
show traffic_segmentation
Purpose Used to display the current traffic segmentation configuration on the
switch.
Syntax show traffic_segmentation {<portlist>}
Description The show traffic_segmentation command is used to display the
current traffic segmentation configuration on the switch.
Parameters
<portlist>
−
Specifies a range of ports for which the current traffic
segmentation configuration on the switch will be displayed. The port list
is specified by listing the lowest slot number and the beginning port
number on that slot, separated by a colon. Then the highest slot
number, and the highest port number of the range (also separated by a
colon) are specified. The beginning and end of the port list range are
separated by a dash. For example, 1:3 specifies slot number 1, port 3.
2:4 specifies slot number 2, port 4. 1:3-2:4 specifies all of the ports
between slot 1, port 3 and slot 2, port 4
−
in numerical order.
Restrictions The port lists for segmentation and the forward list must be on the same
switch.
Example usage:
To display the current traffic segmentation configuration on the switch.