D-Link Nuclias Connect Hub Plus DNH-200, Руководство пользователя

Страница: 56 / 141

Nuclias Connect Hub Plus User Manual AP Network
56
list, and configure the following parameters:
Band Select wireless frequency.
Index
Selec t SSID index (Primary and SSID 1 to SSID 7). To
create a new SSID, select a new index parameter
first.
SSID Enter the wireless network name. The SSID must be
unique for each SSID index.
Character Set Select the character set to be used in the SSID
encoding: UTF-8 or GB2312.
SSID Broadcast Enable or disable the wireless SSID visibility.
WMM (Wi-Fi Multimedia)
Enable or disable the Wi-Fi Multimedia that
facilitates traffic prioritization according to the
Access Category.
Security Select the wireless security standard: Open System
(no pre-shared key required), Enhanced Open,
Enhanced Open+ Open, WPA-Personal, WPA
Enterprise (Radius server required), and 802.1X
(Radius server required).
Fast Roaming (802.11 k/v/r) Enable or disable fast roaming. This function is only
available for compatible models and specific
software versions.
Encryption Enable or disable WEP Open System encryption. The
function is only available when Security is set as
Open System .
Key Size (for Open System)
Select the WEP key size: 64 or 128 bits.
Key Type (for Open System) Select the WEP key type: ASCII or HEX.
Key Value Enter the open system WEP encryption key.
Depending on the key size selected, enter 10 or 26
hexadecimal characters (or 5 or 13 ASCII characters).
Encryption Type Select the encryption type: Auto, TKIP, or AES (the
only option available for WPA3). This option is only
available when
Security is set as WPA .
WPA Mode
Select Auto (WPA or WPA2), WPA2 or WPA3, WPA2
Only, or WPA3 Only.
Passphrase Enter an alphanumeric passphrase. The function is
only available when
Security is set as WPA-Personal.
Group Key Update Interval Enter the WPA group key update interval in seconds.
RADIUS Server/Port/Secret Enter the RADIUS server’s IP address. The function