D-Link Nuclias Connect Hub Plus DNH-200, Руководство пользователя

Страница: 65 / 141

Nuclias Connect Hub Plus User Manual AP Network
65
Configuration > Profile Settings > [Site] > [Network] > Bandwidth Optimization to view
existing settings.
Enable Bandwidth
Optimization Enable or disable bandwidth optimization. Enable this to
configure with the following settings.
Downlink Bandwidth
Enter the total downlink bandwidth for the access points
in Mbits/sec.
Uplink Bandwidth Enter the total uplink bandwidth for the access points in
Mbits/sec.
Rule Type Select the rule type:

Allocate average bandwidth for each station:
Optimize bandwidth by averaging the allocated
bandwidth for each client.

Allocate an upper limit of bandwidth for each
station: Specify the maximum bandwidth for each
connected client, while reserving available
bandwidth for other uses.

Allocate different bandwidth limits for 11a/b/g/n
station: The weights of 802.11b/g/n and 802.11a/n
clients are 10%/20%/70% and 20%/80%
respectively. The AP will distribute different amount
of bandwidth for 802.11a/b/g/n clients.

Allocate specific bandwidth for SSID: All clients
share the assigned bandwidth.
Band Select the wireless frequency band used in the rule.
SSID Index
Select the SSID used in the rule.
Downlink Speed Enter the downlink speed assigned to each station or the