D-Link Nuclias Connect Hub Plus DNH-200 Скачать руководство пользователя страница 63

Страница: 63 / 141

Nuclias Connect Hub Plus User Manual

AP Network

Configuration > Profile Settings > [Site] > [Network] > VLAN

to view existing settings.

VLAN Status

Click the drop-down menu to enable or disable VLANs.

VLAN List

The VLAN List shows a list of created VLANs and their members with Tag/Untag information.

You can click

to modify a selected VLAN or

to delete a VLAN configuration.

Port List

The

Port List

tab shows the VLAN membership assignment of the ports. It also shows the

PVID information of each port.

Add/Edit VLAN

The

Add/Edit VLAN

page

allows you to create a new VLAN identified by a VLAN ID and assign

ports to that VLAN.
Use the following steps to configure a VLAN:
1.

Specify the VLAN ID and the name. The VLAN ID is a unique value assigned to a VLAN.
Enter a value between 1 and 4094.

Map the listed interfaces and SSIDs for different radio bands to this VLAN with the
following options:

Untagged –

Make the interface/SSID untagged from the VLAN. For tagged frames, tags

will be removed before being forwarded.

Tagged –

Include the interface/SSID as a member of the VLAN and its frames will be

tagged with the VLAN ID. It will only accept frames tagged with the same VID.

For

untagged frames, they will be tagged with PVID before being forwarded.

Not Member –

Exclude the interface/SSID from the VLAN.

Содержание Nuclias Connect Hub Plus DNH-200














































































































































Результаты поиска

Содержание Nuclias Connect Hub Plus DNH-200

Отзывы:

Похожие инструкции для Nuclias Connect Hub Plus DNH-200

Бренды по названию

Популярные бренды

D-Link Nuclias Connect Hub Plus DNH-200, Руководство пользователя

Результаты поиска

Содержание Nuclias Connect Hub Plus DNH-200

Отзывы:

Похожие инструкции для Nuclias Connect Hub Plus DNH-200

Бренды по названию

Популярные бренды