D-Link Nuclias Connect Hub Plus DNH-200, Руководство пользователя

Страница: 57 / 141

Nuclias Connect Hub Plus User Manual AP Network
57
is only available when Security is WPA-Enterprise or
802.1X . Enter the server’s IP address, port number
and secret.
Accounting Mode
Enable or disable the use of an accounting server.
Accounting Server/Port/Secret The RADIUS Server uses an accounting server as a
management system to manage users who use a
network service. Enter the accounting server’s IP
address, port number and secret.
Note
:
Once the settings are updated, the configuration must be uploaded to the access
points. See Create Profile in the previous section for further information.
In the Access Control Section, the following parameters can be configured:
Action Select the action to be applied to the clients: Accept
or Reject .
MAC Address
Enter the MAC address of the clients that will be allowed
or denied access and click
Add
. The maximum number of
entries allowed is 512.
Upload MAC Address List Click Browser... to select the MAC address file, located on
the local computer, that will be uploaded. Click Upload to
update the MAC address list. Click Download to
download the current MAC address list. The MAC address
list has to be a line break delimited txt file.
IP Filter Settings Enable or disable IP Filtering . The maximum number of
entries allowed is 64.
IP Address/ Subnet Mask Enter the IP address and subnet mask of the clients to
which the allow/deny list should be applied.
In the
User Authentication
section, the following parameters can be configured:
Authentication Type Select the authentication type to be applied to the
wireless clients:
Disabled, Web Redirection Only,
Username/Password, Remote RADIUS, LDAP, POP3,
Passcode, External Captive Portal, MAC Address, Click
Through, or Social Login
.
Session/Idle Timeout
(2~1440) Enter the session/idle timeout value.
Enable Simultaneous Login Check to enable simultaneous login.
Allow (1~720 ) times
Limit the number of login times per day.