D-Link DXS-3227 - xStack Switch - Stackable, Руководство по установке в сети

Страница: 384 / 424

Appendix A, Device Specifications and Features
Page 383
DXS-32XX Features
This appendix describes the device features. The system supports the following features:
Feature Description
Auto-Update Support the automatic update of the image file, boot file and
configuration file; if updated files are available in the network.
Auto Negotiation Auto negotiation allows an device to advertise modes of
operation. The auto negotiation function provides the means to
exchange information between two devices that share a point-to-
point link segment, and to automatically configure both devices to
take maximum advantage of their transmission capabilities.
Auto negotiation provides port advertisement. Port advertisement
allows the system administrator to configure the port speeds
advertised.
Automatic MAC Addresses Aging MAC addresses from which no traffic is received for a given
period are aged out. This prevents the Bridging Table from over-
flowing.
Back Pressure On half-duplex links, the receiving port prevents buffer overflows
by occupying the link so that it is unavailable for additional traffic.
Class Of Service The IEEE 802.1p signaling technique is an OSI Layer 2 standard
for marking and prioritizing network traffic at the data link/MAC
sub-layer. 802.1p traffic is classified and sent to the destination.
No bandwidth reservations or limits are established or enforced.
802.1p is a spin-off of the 802.1Q (VLANs) standard. 802.1p
establishes eight levels of priority, similar to the IP Precedence IP
Header bit-field.
Command Line Interface Command Line Interface (CLI) syntax and semantics conform as
much as possible to common industry practice.
Syslog is a
protocol that enables event notifications to be sent to a set of
remote servers, where they can be stored, examined and acted
upon. The system sends notifications of significant events in real
time, and keeps a record of these events for after-the-fact usage
Configuration File Management The device configuration is stored in a configuration file. The Con-
figuration file includes both system wide and port specific device
configuration. The system can display configuration files in the
form of a collection of CLI commands, which are stored and
manipulated as text files.
DHCP Clients Dynamic Host Client Protocol. DHCP enables additional setup
parameters to be received from a network server upon system
startup. DHCP service is an on-going process.