D-Link DWS-3227 - xStack Switch - Stackable, Руководство по установке в сети

Страница: 41 / 372

DXS/DWS 3200 Series User Guide
Page 40
The following example illustrates the process:
To verify the IP address, enter the show ip interface command. The device is now configured with an IP address.
Security Management and Password Configuration
System security is handled through the AAA (Authentication, Authorization, and Accounting) mechanism that
manages user access rights, privileges, and management methods. AAA uses both local and remote user data-
bases. Data encryption is handled through the SSH mechanism.
The system is delivered with no default password configured; all passwords are user-defined. If a user-defined
password is lost, a password recovery procedure can be invoked from the Startup menu. The procedure is appli-
cable for the local terminal only and allows a one-time access to the device from the local terminal with no pass-
word entered.
Configuring Security Passwords Introduction
The security passwords can be configured for the following services:
•
Console
•
Telnet
•
SSH
•
HTTP
•
HTTPS
Passwords are user-defined.
When creating a user name, the default priority is "1," which allows access but not configuration rights. A priority of
"15" must be set to enable access and configuration rights to the device. Although user names can be assigned
privilege level 15 without a password, it is recommended to always assign a password. If there is no specified
password, privileged users can access the Web interface with any password.
Configuring an Initial Console Password
To configure an initial console password, enter the following commands:
When initially logging on to a device through a console session, enter george at the password prompt.
When changing a device’s mode to enable, enter george at the password prompt.
Console>
enable
Console# delete startup-config
Startup file was deleted
Console#
reload
You haven’t saved your changes. Are you sure you want to continue (y/n)[n]?
This command will reset the whole system and disconnect your current
session.Do you want to continue (y/n)[n]?
******************************************************
/*the device reboots */
Console(config)# aaa authentication login default line
Console(config)#
aaa authentication enable default line
Console(config)# line console
Console(config-line)# login authentication default
Console(config-line)#
enable authentication default
Console(config-line)# password george