background image

DVG-6004S/6008S User’s Manual 

 

Gateway Configuration-Web Browser            

3. Gateway Configuration – Use Web Browser 

The VoIP gateway allows users to configure its settings using a web interface (Web UI). You can access the 
Configuration Menu by opening a web-browser (e.g., Internet Explorer or Netscape Navigator) and entering the 
factory default LAN IP address: 192.168.8.254. The IP address of the Web UI is same as the default LAN IP 
noted elsewhere in this user’s manual. 

You can also use an ordinary telephone, connect it to the gateway, and dial ”101” to inquire about the current 
WAN Port IP address and then use the WAN port to log-in. 

Instructions 

y

 

Open a Web-Browser (e.g., Explorer, Navigator, Opera, Firefox).

 

y

 

Enter the LAN port IP address. The default LAN port IP address is: 192.168.8.254. 

 

y

 

The log-in screen below will appear after you connect. (The factory default settings for

 Login ID 

and

 

Password 

are blank (i.e., no login ID, no password).)

 

 

 

 
 
The gateway does not allow multiple people to configure the gateway simultaneously. Please remember to 
logout or restart the system if you are not using the web configuration function. 

 

D-Link Systems, Inc.

       

                               

                                                                                                                    7 

This Manual: http://www.manuallib.com/file/2602385

Содержание DVG-6004S






















































































Отзывы: