DVG-6004S/6008S User’s Manual
Digt Map
y
User Dial Length:
Defines total number of digits that user dialed. A setting of zero tells the gateway
scans digits only and disregards the total digit count.
y
Route:
Determine the interface calls should go through if above conditions satisfied.
Methods of Digit Map:
Method 1- Single mapping:
Fill a short code into the Scan Code column, and enter the desired phone
number into the VoIP Dial-out or PSTN Dial-out column.
For example
,
Scan Code: 55
VoIP Dial-out: 07021234567
User Dial Length: 2
Route: VoIP
As an incoming call from PSTN, the user dials 55 and the system will dial 07021234567. You also can use
Digit Map Testing to know that the system will dial 07021234567 and go through Internet.
Method 2- Multi mapping:
Fill the prefix code into the Scan Code column and the format to transfer into the
VoIP Dial-out or PSTN Dial-out column.
For example
,
Scan Code: 2???
PSTN Dial-out: 35106???
User Dial Length: 4
Route: PSTN
As an incoming call from PSTN, the user dials 2301. The system will dial 351006301 and go through
PSTN/FXO. You also can use Digit Map Testing to know that the system will dial 351006301 and go through
PSTN/FXO.
D-Link Systems, Inc.
36
This Manual: http://www.manuallib.com/file/2602385
