DVG-6004S/6008S User’s Manual
Digt Map
3-10 Digit Map
Digit Map now is combined the original feature of Digit Map and Speed Dial. You can use “?” or “%” in the
column of Scan Code, VoIP Dial-out and PSTN Dial-out. “?” is a single digit, and “%” is wildcard. It provides
a mapping between the number received from user and the replaced or modified number for real dial out.
With this function, user can easily add certain leading digits to replace full number.
y
Alert if Auto fails:
Tick the check box to play a voice announcement before calling out. It reminds user
that this call is through PSTN.
y
Enable Pound Key ' # ' Function:
It is to speed up the connection of a call by entering ' # ' after a
complete phone number is dialed.
y
Default Call Route
: The default call route can be Auto, VoIP or Deny.
Auto (VoIP first):
The call route is VoIP first, and the next is PSTN.
VoIP:
The call route is VoIP only.
PSTN:
The call route is PSTN only.
Deny:
The call will be denied.
Digit Map Testing
y
Test Dial No.:
You have to set some rules in Digit Map Setting first and enter the number for test.
y
Result:
The gateway will show the number for VoIP Dial-out and PSTN Dial-out according to the Digit
Map Setting as below.
Digit Map Rule
y
Enable:
Enable detection of this entry.
y
Scan Code:
Defines the digits for the gateway to scan while user is dialing.
y
VoIP Dial-out
: Defines the dialed number rule for the gateway to call through Internet.
y
PSTN Dial-out:
Defines the dialed number rule for the gateway to call through PSTN.
D-Link Systems, Inc.
35
This Manual: http://www.manuallib.com/file/2602385
