DVG-6004S/6008S User’s Manual
Advanced Options
3-9 Advanced Options
NOTE:
There are two operating levels when entering the Web UI. Logging-in as the Administrator
allows you to change all settings. A Web UI user only has access to some settings.
y
Administrator’s Name and Password:
Enter the administrator name and password, which has the
highest level of control of the gateway.
y
Web UI Login ID and Web UI/IVR Password:
Enter log-in ID and password when you log-in to the
Web interface/IVR of the gateway as a normal user.
y
Web UI auto logout:
If a user does not act within the effective time range when logging into the web
interface, the user will be disconnected from the web page to allow others to log-in.
y
Dial Wait Timeout:
Use this variable to set the wait time for the user’s first key pressing when dialing a
number. The user will hear a busy tone if he or she does not press the first key within the set time
frame.
y
Inter Digits Timeout:
Set the waiting time between each key press. The numbers input up to that
point will be dialed after the timeout.
y
Minimum DTMF ON Length (Dial on)/ Minimum DTMF OFF Length (Dial off - between tones):
Used to set the dial tone when a call is being diverted to another extension.
y
DTMF Detection Sensitivity:
Used to adjust the sensitivity of the telephone keys.
y
FXO Dial Type
: Choose dialing type of FXO. There are DTMF and Pulse.
y
Pulse Dial Mark/Space Ratio
: Duration and break of pulse dial ration.
y
FXO Impedance:
Choose the correct impedance in your country or area.
D-Link Systems, Inc.
31
This Manual: http://www.manuallib.com/file/2602385
