D-Link DSL-2544N, Руководство пользователя

Страница: 24 / 68

Section 3 – Web Configuration
D-Link DSL-2544N User Manual 22
2.4G Wireless
Choose
SETUP
>
2.4G Wireless
. The
Wireless Connection
page is shown as the
figure appears on the right. In this page, you can configure the wireless settings for
your router.
The following table describes the parameters in this page.
Field Description
Enable
Wireless
Select this to turn Wi-Fi on.
AP Isolation Select this to turn MultiAP isolation on.
SSID
The Wireless Network Name is a unique name that
identifies a network. All devices on a network must share
the same wireless network name in order to
communicate on the network. If you decide to change the
wireless network name from the default setting, enter
your new wireless network name in this field.
Visibility Status Select
Visible , the SSID can be detected. Select
Invisible , the SSID cannot be detected.
Country Select the country you located from the drop-down list.
802.11 Mode
Select the appropriate 802.11 mode based on the
wireless clients in your network. It is recommended to
keep it as default.
Band Width
Select the appropriate band of 20M or 20M/40M
according to your subscribed broadband service.
Wireless
Channel
Select the wireless channel from the pull-down menu. It
is different for different country.
Wireless
Security Mode
Wireless security is vital to your network to protect the
wireless communication among wireless stations, access
points and wired network. There are four security modes:
None , WPA only , WPA2 , and WPA/WPA2 Mixed .