D-Link DSL-2544N Скачать руководство пользователя

Страница: 11 / 68

Section 2 – Installation

D-Link DSL-2544N User Manual

Information you will need about your LAN or computer

Ethernet NIC

If your computer has an Ethernet NIC, you can connect the DSL-2544N to the Ethernet port using an Ethernet cable. You can also use the Ethernet

ports on the DSL-2544N to connect to other computers or Ethernet devices.

DHCP Client status

Your DSL-2544N ADSL Router is configured, by default, to be a DHCP server. This means that it can assign an IP address, subnet mask and a

default gateway address to computers on your LAN. The default range of IP addresses the DSL-2544N will assign are from 192.168.1.2 to

192.168.1.254. Your computer (or computers) needs to be configured to obtain an IP address automatically (that is, they need to be configured as

DHCP clients.)

It is recommended that you collect and record this information here, or in some other secure place, in case you have to re-configure your ADSL

connection in the future.

Once you have the above information, you are ready to setup and configure your DSL-2544N ADSL Router.

Содержание DSL-2544N





































































Результаты поиска

Содержание DSL-2544N

Отзывы:

Похожие инструкции для DSL-2544N

Бренды по названию

Популярные бренды

D-Link DSL-2544N, Руководство пользователя

Результаты поиска

Содержание DSL-2544N

Отзывы:

Похожие инструкции для DSL-2544N

Бренды по названию

Популярные бренды