D-Link DSL-224, Руководство пользователя

Страница: 11 / 73

Section 2 – Installation
D-Link DSL-224 User Manual
9
Hardware Description and Installation
LED Indicators
Note:
The figures in this document are for reference only.
Figure 1 Front panel
The following table describes the LEDs of the device.
LED Color Status Description
Power
Green
Off The power is off.
On The initialization of the system is complete.
Red
On The device is initiating.
Blinking The firmware is upgrading.
LAN Green
Off The Ethernet interface is not properly connected.
Blinking The Ethernet interface is properly connected and data is being transmitted.
On The Ethernet interface is properly connected, but no data is being transmitted.
WLAN Green
Blinking The WLAN function is enabled and data is being transmitted over the WLAN.
On The WLAN function is enabled, but no data is being transmitted over the WLAN.
Off The WLAN function is disabled.
WPS
Green
Blinking WPS is successfully triggered.
Solid on for 5
seconds and
then turns off
Connection is successfully established between the router and the client through WPS.