D-Link DSL-224, Руководство пользователя

Страница: 10 / 73

Section 2 – Installation
D-Link DSL-224 User Manual
8
Information you will need about your LAN or computer
Ethernet NIC
If your computer has an Ethernet NIC, you can connect the DSL-224 to the Ethernet port using an Ethernet cable.
DHCP Client status
Your DSL-224 VDSL2(ADSL/ADSL2+) Router is configured, by default, to be a DHCP server. This means that it can assign an IP address, subnet
mask and a default gateway address to computers on your LAN. The default range of IP addresses the DSL-224 will assign are from 10.0.0.1 to
10.0.0.254. Your computer (or computers) needs to be configured to obtain an IP address automatically (that is, they need to be configured as
DHCP clients.)
It is recommended that you backup or record this information here, or in some other secure place, in case you have to re-configure your
VDSL2(ADSL/ADSL2+) connection in the future.
Once you have the above information, you are ready to setup and configure your DSL-224 VDSL2(ADSL/ADSL2+) Router.