manualshive.com logo in svg

D-Link DGS-3200-16 - Switch - Stackable, Руководство пользователя

"Сетевой коммутатор D-Link DGS-3200-16 предлагает высокую производительность и возможность стекирования. На нашем сайте вы можете бесплатно скачать Руководство пользователя для этого устройства. Посетите manualshive.com прямо сейчас, чтобы получить подробный мануал для вашего коммутатора."

Поделиться
Скачать
background image

xStack

® 

DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch 

 

140 

     

correct response. NOTE: This IP does not respond to ARP requests or ICMP packets. 

HTTP(s) Port (1-
65535) 

This parameter specifies the TCP port that the JWAC Switch listens to and uses to finish the 
authenticating process.  

UDP Filtering 

This parameter enables or disables JWAC UDP Filtering. When UDP Filtering is 

Enabled

, all 

UDP and ICMP packets except DHCP and DNS packets from unauthenticated hosts will be 
dropped. 

Forcible Logout 

This parameter enables or disables JWAC Forcible Logout. When Forcible Logout is 

Enabled

, a Ping packet from an authenticated host to the JWAC Switch with TTL=1 will be 

regarded as a logout request, and the host will move back to the unauthenticated state. 

RADIUS Protocol 

This parameter specifies the RADIUS protocol used by JWAC to complete a RADIUS 
authentication. The options include 

Local

, 

EAP

 

MD5

, 

PAP

, 

CHAP

, 

MS CHAP

, and 

MS 

CHAPv2

.  

Redirect State 

This parameter enables or disables JWAC Redirect. When the redirect quarantine server is 
enabled, the unauthenticated host will be redirected to the quarantine server when it tries to 
access a random URL. When the redirect JWAC login page is enabled, the unauthenticated 
host will be redirected to the JWAV login page in the Switch to finish authentication. When 
redirect is disabled, only access to the quarantine server and the JWAC login page from the 
unauthenticated host are allowed, all other web access will be denied. NOTE: When enabling 
redirect to the quarantine server, a quarantine server must be configured first. 

Redirect Destination 

This parameter specifies the destination before an unauthenticated host is redirected to either 
the 

Quarantine Server

 or the 

JWAC Login Page

. 

Redirect Delay Time 
(0-10) 

This parameter specifies the Delay Time before an unauthenticated host is redirected to the 
Quarantine Server or JWAC Login Page. Enter a value between 

0

 and 

10

 seconds. A value 

of 

0

 indicates no delay in the redirect. 

Quarantine Server Configuration 

Error Timeout (5-
300) 

This parameter is used to set the Quarantine Server Error Timeout. When the Quarantine 
Server Monitor is enabled, the JWAC Switch will periodically check if the Quarantine works 
okay. If the Switch does not receive any response from the Quarantine Server during the 
configured Error Timeout, the Switch then regards it as not working properly. Enter a value 
between 

5

 and 

300

 seconds. 

Monitor 

This parameter enables or disables the JWAC Quarantine Server Monitor. When 

Enabled

, 

the JWAC Switch will monitor the Quarantine Server to ensure the server is okay. If the 
Switch detects no Quarantine Server, it will redirect all unauthenticated HTTP access 
attempts to the JWAC Login Page forcibly if the Redirect is enabled and the Redirect 
Destination is configured to be a Quarantine Server. 

URL 

This parameter specifies the JWAC Quarantine Server URL. If the Redirect is enabled and 
the Redirect Destination is the Quarantine Server, when an unauthenticated host sends the 
HTTP request packets to a random Web server, the Switch will handle this HTTP packet and 
send back a message to the host to allow it access to the Quarantine Server with the 
configured URL. When a computer is connected to the specified URL, the quarantine server 
will request the computer user to input the user name and password to complete the 
authentication process. 

Update Server Configuration 

Update Server IP 

This parameter specifies the Update Server IP address. 

Mask 

This parameter specifies the Server IP net mask. 

Содержание DGS-3200-16 - Switch - Stackable


















































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DGS-3200-16 - Switch - Stackable

GarrettCom MAGNUM 6KM Installation And User Manual preview
MAGNUM 6KM
Бренд: GarrettCom Страницы: 24
IBM TotalStorage 3534-F08 Installation And User Manual preview
TotalStorage 3534-F08
Бренд: IBM Страницы: 105
IBM RedBooks SAN24B-5 Product Manual preview
RedBooks SAN24B-5
Бренд: IBM Страницы: 11
IBM RedBooks SAN24B-5 Quick Start Manual preview
RedBooks SAN24B-5
Бренд: IBM Страницы: 2
IBM F16 User Manual preview
F16
Бренд: IBM Страницы: 123
IBM 8265 Nways ATM Switch User Manual preview
8265 Nways ATM Switch
Бренд: IBM Страницы: 192
WAGO 852-111 Mounting, Installation And Handling preview
852-111
Бренд: WAGO Страницы: 39
IOGear GUH420 Quick Start Manual preview
GUH420
Бренд: IOGear Страницы: 1
Mellanox Technologies MIS5023 Dismantling Manual preview
MIS5023
Бренд: Mellanox Technologies Страницы: 12
Kramer XL 1204V2 Specifications preview
XL 1204V2
Бренд: Kramer Страницы: 2
Kramer Sierra Pro XL 1608V5S Specifications preview
Sierra Pro XL 1608V5S
Бренд: Kramer Страницы: 2
Bridgetek PANL PH44 Quick Start Manual preview
PANL PH44
Бренд: Bridgetek Страницы: 2
Crestron CLW-SW1/4RF Operation Manual preview
CLW-SW1/4RF
Бренд: Crestron Страницы: 36
Lantech IPGS-5 Series User Manual preview
IPGS-5 Series
Бренд: Lantech Страницы: 29
TRENDnet TE100-DS24 Specifications preview
TE100-DS24
Бренд: TRENDnet Страницы: 2
SMART-AVI MU-88 User Manual preview
MU-88
Бренд: SMART-AVI Страницы: 9
Inline 62652I Quick Installation Manual preview
62652I
Бренд: Inline Страницы: 4
Me CUVEO CR-UPS2000 Manual preview
CUVEO CR-UPS2000
Бренд: Me Страницы: 44

Бренды по названию

Популярные бренды

Загрузить еще бренды