xStack
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
174
To set the Access Rule for IPv6, adjust the following parameters and click
Apply
.
Parameter Description
Access ID (1-100)
Type in a unique identifier number for this access. This value can be set from
1
to
100
.
Action
Select
Permit
to specify that the packets that match the access profile are forwarded by the
Switch, according to any additional rule added (see below).
Select
Deny
to specify that packets that do not match the access profile are not forwarded by the
Switch and will be filtered.
Flow Label
Configuring this field, in hex form, will instruct the Switch to examine the flow label field of the
IPv6 header. This flow label field is used by a source to label sequences of packets such as non-
default quality of service or real time service packets..
Time Range
Name
Tick the check box and enter the name of the Time Range settings that has been previously
configured in the
Time Range
Settings
window. This will set specific times when this access rule
will be implemented on the Switch.
Ports
Ticking the All Ports check box will denote all ports on the Switch.
To view the settings of a previously correctly configured rule, click the corresponding
Show Details
button on the
CPU
Access
Rule List
window
to view the following window:
Figure 6 - 39. CPU Access Rule Detail Information window for IPv6
To establish the rule for a previously created CPU Access Profile:
To configure the Access Rules for IP, open the
CPU
Access Profile List
window and click
Add/View Rules
for a Packet Content
entry. This will open the following window.
Figure 6 - 40. CPU Access Rule List window for Packet Content
To remove a previously created rule, click the corresponding
Delete Rules
button. To add a new Access Rule, click the
Add Rule
button:
Содержание DGS-3200-16 - Switch - Stackable
Страница 1: ...Manual ProductModel xStack DGS 3200 Series Layer2ManagedGigabit Ethernet Switch Release 1 35 ...
Страница 235: ......
