D-Link DGS-3200-16 - Switch - Stackable Скачать руководство пользователя

Страница: 48 / 273

xStack

DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch

SNMP Group Table

An SNMP Group created with this table maps SNMP users (identified in the SNMP User Table) to the views created in the
previous window.

To view the following window, click

Configuration

SNMP Settings

SNMP Group Table

Figure 2 - 39. SNMP Group Table window

To delete an existing SNMP Group Table entry, click the

Delete

button next to the corresponding entry.

To add a new entry to the Switch’s SNMP Group Table, enter the information at the top of the window and then click

Apply

The following parameters can set:

Parameter Description

Group Name

Type an alphanumeric string of up to 32 characters. This is used to identify the new SNMP
group of SNMP users.

Read View Name

This name is used to specify the SNMP group created can request SNMP messages.

Write View Name

Specify a SNMP group name for users that are allowed SNMP write privileges to the Switch’s
SNMP agent.

Notify View Name

Specify a SNMP group name for users that can receive SNMP trap messages generated by
the Switch’s SNMP agent.

Security Model

SNMPv1

– Specifies that SNMP version 1 will be used.

SNMPv2

– Specifies that SNMP version 2c will be used. The SNMPv2 supports both

centralized and distributed network management strategies. It includes improvements in the
Structure of Management Information (SMI) and adds some security features.

SNMPv3

– Specifies that the SNMP version 3 will be used. SNMPv3 provides secure access

to devices through a combination of authentication and encrypting packets over the network.

Security Level

The Security Level settings only apply to SNMPv3.

NoAuthNoPriv

– Specifies that there will be no authorization and no encryption of packets sent

between the Switch and a remote SNMP manager.

AuthNoPriv

– Specifies that authorization will be required, but there will be no encryption of

packets sent between the Switch and a remote SNMP manager.

AuthPriv

– Specifies that authorization will be required, and that packets sent between the

Switch and a remote SNMP manger will be encrypted.

To implement your new settings, click

Apply

Содержание DGS-3200-16 - Switch - Stackable


















































































































































































































































































Результаты поиска

Содержание DGS-3200-16 - Switch - Stackable

Отзывы:

Похожие инструкции для DGS-3200-16 - Switch - Stackable

Бренды по названию

Популярные бренды

D-Link DGS-3200-16 - Switch - Stackable, Руководство пользователя

Результаты поиска

Содержание DGS-3200-16 - Switch - Stackable

Отзывы:

Похожие инструкции для DGS-3200-16 - Switch - Stackable

Бренды по названию

Популярные бренды