D-Link DGS-3200-16 - Switch - Stackable, Руководство пользователя

Страница: 23 / 273

xStack
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
10
IPv6 Neighbor Settings
The user can configure the Switch’s IPv6 neighbor settings. The Switch’s current IPv6 neighbor settings will be displayed in the
table at the bottom of this window.
To view the following window, click
Configuration
>
IPv6 Neighbor Settings
:
Figure 2- 8. IPv6 Neighbor Settings window
Enter the Interface Name, Neighbor IPv6 Address, and the Link Layer MAC Address and then click the
Add
button. The State
can be set to All , Address , Static , or Dynamic .
To look for an IPv6 Neighbor Settings table entry, enter the Interface Name, select the desired State in the middle section of this
window, and then click the
Find
button.
To delete all the entries being displayed on the table at the bottom of this window, click the
Clear
button.
The following parameters may be configured or viewed:
Parameter Description
Interface Name Enter the name of the IPv6 neighbor. To search for all the current interfaces on the Switch, go to
the second Interface Name field in the middle part of the window, tick the All check box, and then
click the
Find button.
Neighbor IPv6
Address Enter the neighbor IPv6 address.
Link Layer MAC
Address Enter the link layer MAC address.
State Use the drop-down menu to select All , Address , Static , or Dynamic .