D-Link DGS-2000 Series Скачать руководство пользователя страница 122

Страница: 122 / 144

4 Web-based Switch Configuration

D-Link DGS-2000 Series Ethernet Switch User Manual

TCP All

- Indicates CPU Filter action will be on all TCP Packets.

TCP Source Port

- Take effect if TCP Source Port matches.

TCP Destination Port

Take effect if TCP Destination Port matches.

UDP All

- Indicates CPU Filter action will be on all UDP Packets.

UDP Source Port

Take effect if UDP Source Port matches.

UDP Destination Port

- Take effect if UDP Destination Port matches.

Action:

Specify the CPU Filter forwarding action matching the rule criteria.

Permit -

Forwards packets if all other CPU Filter criteria are met.

Deny

- Drops packets if all other CPU Filter criteria is met.

Press

Apply

for the settings to take effect.

ACL > CPU Filter Access Profile List

The CPU Filter Access Profile List provides information for configuring CPU Profiles manually. CPU Filter

Access profiles are attached to interfaces, and define how packets are forwarded if they match the CPU

Filter criteria.

Figure 4.173 - ACL > CPU Filter Access Profile List

The contents of CPU Filter Access Profile List table include:

Profile ID:

Indicates the profile Identification number. The possible configured profile IDs are

1~50

, and

profile ID

is reserved for Voice VLAN.

Owner Type:

The owner type of CPU Filter profile, it can be normal CPU Filter, Voice VLAN or Surveillance

VLAN.

Profile Summary:

Displays the profile summary.

Show Details:

To display a CPU Filter’s profile details. The CPU Filter profile details are displayed below the

CPU Filter table.

Edit/New Rules:

To configure or add the CPU access rule in this profile.

To add a new rule, please see

Add CPU Filter Profile

in the next section.

Delete All:

To delete all access profile.

To manually add a profile, click

Add CPU Filter Profile

Figure 4.174 - ACL > CPU Filter Access Profile List -Add CPU Filter Profile

Содержание DGS-2000 Series

















































































































































Результаты поиска

Содержание DGS-2000 Series

Отзывы:

Бренды по названию

Популярные бренды

D-Link DGS-2000 Series, Справочное руководство

Результаты поиска

Содержание DGS-2000 Series

Отзывы:

Бренды по названию

Популярные бренды