D-Link DFL-500 Скачать руководство пользователя | Manualshive

Страница: 45 / 140

background image

·

Set the Forwarded IP to the IP address of the server to which to send the packets.

·

In the Forwarded Service Port list, select the service used by the packets when they are forwarded to the
server. Usually you would select the same service as you selected in the External Service Port list, but
you can select a different service port to have the DFL-500 change the destination port of packets before
they are forwarded to the server.

·

Select OK to save your changes.

Port forwarding configuration example

IP/MAC binding

IP/MAC binding protects the DFL-500 from IP Spoofing attacks. IP Spoofing attempts to use the IP address of
a trusted computer to access the DFL-500 from a different computer. The IP address of a computer can easily
be changed to a trusted address, but MAC addresses are added to ethernet cards at the factory and cannot
easily be changed.
You can enter the IP addresses and corresponding MAC addresses of trusted computers into the DFL-500
firewall configuration. When a packet arrives from a trusted IP address, it is checked to determine whether the
MAC address that the packet originated from matches the MAC address in the table. The DFL-500 checks all
packets received by the DFL-500 external interface. This includes packets addressed to the external interface
and packets passing through the firewall.

Note

: IP/MAC binding is not supported in Transparent mode.

You can configure IP/MAC binding so that the DFL-500 lets traffic with a source address not found in the
IP/MAC binding table pass through the firewall. Any traffic with a source address that is defined in the IP/MAC
binding table must have the correct MAC address or it is blocked. You can also configure the DFL-500 to
block all traffic with a source address that is not found in the IP/MAC binding table, and to only allow traffic
with a source address in the IP/MAC binding table if the IP address and MAC address pair matches an entry
in the table.
MAC addresses are only carried on the local network where they originate, and are not passed from one
network to another.
This section describes:

·

Adding IP/MAC binding addresses

·

Enabling IP/MAC binding

DFL-500 User Manual

45

«
...
43
44
45
46
47
...
»

Содержание DFL-500













































































































































Отзывы:

Нет отзывов

Похожие инструкции для DFL-500

FortiWiFi FortiWiFi-60A

Бренд: Fortinet Страницы: 2

Бренд: Watchguard Страницы: 13

SecPath T9000 IPS Series

Бренд: H3C Страницы: 17

Бренд: McAfee Страницы: 32

NCA-4010 Series

Бренд: Lanner Страницы: 111

Бренд: NETGEAR Страницы: 2

HTTPS VPN Secure WiFi USB Dongle

Бренд: vpneveryone Страницы: 13

Бренд: Mooltipass Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды