manualshive.com logo in svg

D-Link DFL-500, Руководство пользователя

Вам нужна помощь с установкой вашего межсетевого экрана D-Link DFL-500? Бесплатно загрузите Руководство по быстрой установке на нашем сайте manualshive.com. В этом мануале вы найдете все необходимые инструкции для настройки устройства быстро и легко. Не упустите возможность получить информацию из первых рук.

Поделиться
Скачать
background image

 Limited Warranty 

D-Link Systems, Inc. (“D-Link”) provides this 1-Year warranty for its product only to the person or entity who 
originally purchased the product from: 

 

· 

D-Link or its authorized reseller or distributor. 

· 

Products purchased and delivered with the fifty United States, the District of Columbia, US 

Possessions or Protectorates, US Military Installations, addresses with an APO or FPO.  

 

1-Year Limited Hardware Warranty: 

D-Link warrants that the hardware portion of the D-Link products 

described below (“Hardware”) will be free from material defects in workmanship and materials from the date 
of original retail purchase of the Hardware, for the period set forth below applicable to the product type 
(“Warranty Period”).  

 

1-Year Limited Warranty for the Product(s) is defined as follows 

 

· 

Hardware (excluding power supplies and fans)  

· 

Power Supplies and Fans One (1) Year. 

· 

Spare parts and spare kits Ninety (90) days. 

 

D-Link’s sole obligation shall be to repair or replace the defective Hardware at no charge to the original owner. 
Such repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The 
replacement Hardware need not be new or of an identical make, model or part; D-Link may in its discretion 
replace the defective Hardware (or any part thereof) with any reconditioned product that D-Link reasonably 
determines is substantially equivalent (or superior) in all material respects to the defective Hardware. The 
Warranty Period shall extend for an additional ninety (90) days after any repaired or replaced Hardware is 
delivered. If a material defect is incapable of correction, or if D-Link determines in its sole discretion that it is 
not practical to repair or replace the defective Hardware, the price paid by the original purchaser for the 
defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware 
(or part thereof) that is replaced by D-Link, or for which the purchase price is refunded, shall become the 
property of D-Link upon replacement or refund. 

 

Limited Software Warranty: 

D-Link warrants that the software portion of the product (“Software”) will 

substantially conform to D-Link’s then current functional specifications for the Software, as set forth in the 
applicable documentation, from the date of original delivery of the Software for a period of ninety (90) days 
(“Warranty Period”), if the Software is properly installed on approved hardware and operated as contemplated 
in its documentation. D-Link further warrants that, during the Warranty Period, the magnetic media on which 
D-Link delivers the Software will be free of physical defects. D-Link’s sole obligation shall be to replace the 
non-conforming Software (or defective media) with software that substantially conforms to D-Link’s functional 
specifications for the Software. Except as otherwise agreed by D-Link in writing, the replacement Software is 
provided only to the original licensee, and is subject to the terms and conditions of the license granted by D-
Link for the Software. The Warranty Period shall extend for an additional ninety (90) days after any 
replacement Software is delivered. If a material non-conformance is incapable of correction, or if D-Link 
determines in its sole discretion that it is not practical to replace the non-conforming Software, the price paid 
by the original licensee for the non-conforming Software will be refunded by D-Link; provided that the non-
conforming Software (and all copies thereof) is first returned to D-Link. The license granted respecting any 
Software for which a refund is given automatically terminates. 

 

What You Must Do For Warranty Service

:  

Registration is conducted via a link on our Web Site (

http://www.dlink.com/

). Each product purchased must be 

individually registered for warranty service within ninety (90) days after it is purchased and/or licensed.  

 

FAILURE TO PROPERLY TO REGISTER MAY AFFECT THE WARRANTY FOR THIS PRODUCT. 

 

DFL-500 User Manual 

137

Содержание DFL-500













































































































































Отзывы:

Нет отзывов

Похожие инструкции для DFL-500

Viavi Observer Gigastor GS-8P-384T Hardware Installation preview
Observer Gigastor GS-8P-384T
Бренд: Viavi Страницы: 8
Fortinet FortiBridge FortiBridge-1000 Quick Start Manual preview
FortiBridge FortiBridge-1000
Бренд: Fortinet Страницы: 2
Aaeon FWS-2271 User Manual preview
FWS-2271
Бренд: Aaeon Страницы: 100
Fortinet FortiGate FortiGate-60M Administration Manual preview
FortiGate FortiGate-60M
Бренд: Fortinet Страницы: 376
Barracuda QSG 4.X Quick Start Manual preview
QSG 4.X
Бренд: Barracuda Страницы: 2
ZyXEL Communications USG Series Quick Start Manual preview
USG Series
Бренд: ZyXEL Communications Страницы: 2
ZyXEL Communications Unified Security Gateway ZyWALL 300 Brochure & Specs preview
Unified Security Gateway ZyWALL 300
Бренд: ZyXEL Communications Страницы: 6
Meraki MX67W Installation Manual preview
MX67W
Бренд: Meraki Страницы: 9
SIIG FireWire 3-Port CardBus Quick Installation Manual preview
FireWire 3-Port CardBus
Бренд: SIIG Страницы: 8
SIIG DP FireWire 800 PCI-32T Quick Installation Manual preview
DP FireWire 800 PCI-32T
Бренд: SIIG Страницы: 12
NETGEAR FVG318v2 - ProSafe 802.11g Wireless VPN Firewall Switch Use Manual preview
FVG318v2 - ProSafe 802.11g Wireless VPN Firewall Switch
Бренд: NETGEAR Страницы: 9
NETGEAR FVS328 - ProSafe VPN Firewall Reference Manual preview
FVS328 - ProSafe VPN Firewall
Бренд: NETGEAR Страницы: 228
Excelsecu Data Technology Co., Ltd. eSecu FIDO2 User Manual preview
eSecu FIDO2
Бренд: Excelsecu Data Technology Co., Ltd. Страницы: 17

Бренды по названию

Популярные бренды

Загрузить еще бренды