D-Link DES-3326, Руководство пользователя

Страница: 64 / 425

24-port NWay Ethernet Switch User’s Guide
48 Switch Management and Operating Concepts
Feature Default Value
Enable state STP enabled for all ports
Port priority 128
Port cost 19
Bridge Priority 32,768
Table 5-3. Default STP Parameters
User-Changeable STA Parameters
The factory default setting should cover the majority of
installations. However, it is advisable to keep the default
settings as set at the factory; unless, it is absolutely necessary.
The user changeable parameters in the Switch are as follows:
??
Priority A Priority for the switch can be set from 0 to
65535. 0 is equal to the highest Priority.
?? Hello Time The Hello Time can be from 1 to 10
seconds. This is the interval between two
transmissions of BPDU packets sent by the Root
Bridge to tell all other Switches that it is indeed the
Root Bridge. If you set a Hello Time for your Switch,
and it is not the Root Bridge, the set Hello Time will
be used if and when your Switch becomes the Root
Bridge.
Note: The Hello Time cannot be longer than the Max. Age.
Otherwise, a configuration error will occur.