D-Link DES-3326, Руководство пользователя

Страница: 351 / 425

24-port NWay Ethernet Switch User’s Guide
Web-Based Network Management 335
GMRP
For each corresponding port, GMRP can
be Enabled or Disabled.
Port Trunking
Port trunks can be used to increase the bandwidth of a network
connection or to ensure fault recovery. You can configure up to
6 trunk connections (combining 2 to 8 ports into a fat pipe)
between any two DES-3326 or other Layer 2 switches. However,
before making any physical connections between devices, use the
Trunk Configuration menu to specify the trunk on the devices at
both ends. When using a port trunk, note that:
?? The ports used in a trunk must all be of the same
media type (RJ-45, 100 Mbps fiber, or 1000 Mbps
fiber). The ports that can be assigned to the
same trunk have certain other restrictions (see
below).
?? Ports can only be assigned to one trunk.
?? The ports at both ends of a connection must be
configured as trunk ports.
??
None of the ports in a trunk can be configured as
a mirror source port or a mirror target port.
?? All of the ports in a trunk have to be treated as a
whole when moved from/to, added or deleted
from a VLAN.
?? The Spanning Tree Protocol will treat all the
ports in a trunk as a whole.