manualshive.com logo in svg

D-Link DES-3010F, Руководство пользователя

D-Link DES-3010F - многофункциональный коммутатор с гибкими настройками через командный интерфейс. Скачайте бесплатное руководство по использованию через manualshive.com для настройки и управления устройством. Получите доступ к полному описанию функций и возможностей коммутатора в руководстве по командной строке.

Поделиться
Скачать
background image

DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual 

 

98

The following parameters may be viewed or modified: 

Parameter                       Description 

VLAN ID 

This is the 

VLAN ID

 that, along with the 

VLAN Name

, identifies the VLAN for which to modify 

the 

IGMP Snooping Settings

. 

VLAN Name 

This is the 

VLAN Name 

that, along with the

 VLAN ID

, identifies the VLAN for which to modify 

the 

IGMP Snooping Settings

. 

Query Interval 

(1-65535) 

The 

Query Interval

 field is used to set the time (in seconds) between transmitting IGMP 

queries. Entries between 1 and 65535 seconds are allowed. Default = 125. 

Max Response Time 
(1-25) 

This determines the maximum amount of time in seconds allowed before sending an IGMP 
response report. The 

Max Response Time

 field allows an entry between 1 and 25 

(seconds).  Default = 10. 

Robustness Value  

(1-255) 

Adjust this variable according to expected packet loss. If packet loss on the VLAN is 
expected to be high, the 

Robustness Variable 

should be increased to accommodate 

increased packet loss. This entry field allows an entry of 1 to 255. Default = 2. 

Last Member Query 
Interval (1-25) 

This field specifies the maximum amount of time between group-specific query messages, 
including those sent in response to leave group messages. Default = 1. 

Host Timeout  

(1-16711450) 

This is the maximum amount of time in seconds allowed for a host to continue membership 
in a multicast group without the Switch receiving a host membership report. Default = 260. 

Router Timeout 

(1-16711450) 

This is the maximum amount of time in seconds a route is kept in the forwarding table 
without receiving a membership report. Default = 260. 

Leave Timer 

(1-16711450) 

This specifies the maximum amount of time in seconds between the Switch receiving a leave 
group message from a host, and the Switch issuing a group membership query. If no 
response to the membership query is received before the 

Leave Timer 

expires, the 

(multicast) forwarding entry for that host is deleted. 

Querier State 

Choose

 Enabled

 to enable transmitting IGMP Query packets or 

Disabled

 to disable. The 

default is 

Disabled

. 

Querier Router 
Behavior 

This read-only field describes the behavior of the router for sending query packets. 

Querier 

will denote that the router is sending out IGMP query packets. 

Non-Querier

 will denote that 

the router is not sending out IGMP query packets. This field will only read 

Querier

 when the 

Querier State

 and the 

State

 fields have been Enabled. 

State 

Select 

Enabled 

to implement IGMP Snooping. This field is 

Disabled 

by default. 

Multicast fast leave 

This parameter allows the user to enable the 

Fast Leave

 function. Enabled, this function will 

allow members of a multicast group to leave the group immediately (without the 
implementation of the Last Member Query Timer) when an IGMP Leave Report Packet is 
received by the Switch. The default is 

Disabled

. 

Click 

Apply

 to implement the new settings. Click the 

Show All IGMP Group Entries 

link to return to the 

Current IGMP Snooping Group Entrie

s window. 

 

 

NOTE:

 The Fast Leave function is intended for IGMPv2 users wishing to 

leave a multicast group and is best implemented on VLANs that have only 
one host connected to each port. When one host of a group of hosts uses the 
Fast Leave function, it may cause the inadvertent fast leave of other hosts of 
the group. 

Содержание DES-3010F





































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DES-3010F

ABB RELION REF615R Manual preview
RELION REF615R
Бренд: ABB Страницы: 66
JB Systems Scene Master Operation Manual preview
Scene Master
Бренд: JB Systems Страницы: 24
JB Systems CMX 24 User Manual preview
CMX 24
Бренд: JB Systems Страницы: 61
Lantronix Device Server UDS 10 Hardware Manual preview
Device Server UDS 10
Бренд: Lantronix Страницы: 8
Ubiquiti airFiber AF-5X User Manual preview
airFiber AF-5X
Бренд: Ubiquiti Страницы: 50
Texas Instruments ThunderLAN TNETE100A Programmer'S Manual preview
ThunderLAN TNETE100A
Бренд: Texas Instruments Страницы: 179
Clavister NetWall W20A Getting Started Manual preview
NetWall W20A
Бренд: Clavister Страницы: 89
AOpen 4-Port 10/100Mbps Ethernet Broadband Router User Manual preview
4-Port 10/100Mbps Ethernet Broadband Router
Бренд: AOpen Страницы: 41
TP-Link Archer MR500 User Manual preview
Archer MR500
Бренд: TP-Link Страницы: 110
ICP DAS USA PDS-734D Quick Start Manual preview
PDS-734D
Бренд: ICP DAS USA Страницы: 8
Patton electronics IPLink 2802 Specifications preview
IPLink 2802
Бренд: Patton electronics Страницы: 2
Lanner NCA-1525 User Manual preview
NCA-1525
Бренд: Lanner Страницы: 78
Idis DR-1508P Operation Manual preview
DR-1508P
Бренд: Idis Страницы: 85
E-LINX EIR410-2SFP-T User Manual preview
EIR410-2SFP-T
Бренд: E-LINX Страницы: 24
Z-Wave RAZBERRY 7 PRO Quick Start Manual preview
RAZBERRY 7 PRO
Бренд: Z-Wave Страницы: 6
Sierra Wireless AirCard 750 Installation preview
AirCard 750
Бренд: Sierra Wireless Страницы: 2
TP-Link TD-W8101G Quick Installation Manual preview
TD-W8101G
Бренд: TP-Link Страницы: 16
Xantech RT1610 Installation Instructions Manual preview
RT1610
Бренд: Xantech Страницы: 6

Бренды по названию

Популярные бренды

Загрузить еще бренды