manualshive.com logo in svg

D-Link DES-3010F, Руководство пользователя, Страница: 134 / 260

Поделиться
Скачать
D-Link DES-3010F Скачать руководство пользователя страница 134

DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual 

 

121

MAC Priority Settings 

When using the MAC Priority mechanism, the packet is classified based on the MAC address field priority 
in the MAC priority table entries.  
To configure a destination MAC address for a CoS queue, users must adhere to the following steps: 

1.

 

Users must first enter a static destination MAC address into the Forwarding Database (FDB) of the 
switch. To accomplish this, go to the Unicast Forwarding table in the 

Forwarding Filtering

 folder 

under the 

Configuration

 menu and click on the 

Unicast Forwarding

 link, which will display a 

window for users to enter this information. 

2.

 

Once a destination MAC has been added to the FDB, users must then configure the appropriate 
queue to be mapped to this destination MAC address, using the following window.  

3.

 

Once the previous parameters are set, users should go to the 

Priority Settings

 window located in this 

folder and set the egress ports on the switch to 

MAC Priority

. These ports must only be set for 

MAC Priority and not for any other priority choice. Please be advised that the default priority setting 
is for 802.1p and users must change the priority to MAC Priority for this function to work properly. 
Be sure that the device with this destination MAC address is connected to the port for which this 
priority is configured. 

To view this table, click 

CoS >

 

MAC Priority

 

 

 

Figure 8- 11. MAC Priority Setting 

Type in the 

MAC Address

, select the 

Class ID

 priority level and click the 

Apply

 button.  

Содержание DES-3010F





































































































































































































































































Отзывы:

Нет отзывов