manualshive.com logo in svg

D-Link DES-3010F, Руководство пользователя

D-Link DES-3010F - многофункциональный коммутатор с гибкими настройками через командный интерфейс. Скачайте бесплатное руководство по использованию через manualshive.com для настройки и управления устройством. Получите доступ к полному описанию функций и возможностей коммутатора в руководстве по командной строке.

Поделиться
Скачать
background image

 

 

Disclaimer of Other Warranties: 

EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS PROVIDED “AS-IS” 

WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, 

FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY 

TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO NINETY (90) DAYS. 

EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, 

SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT. 

 

Limitation of Liability: 

TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, 

STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR 

DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, 

DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, 

FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D-LINK’S PRODUCT IS CONNECTED WITH, LOSS OF 

INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK FOR WARRANTY 

SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF 

THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A 

BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON-

CONFORMING PRODUCT.  THE MAXIMUM LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE 

PRODUCT COVERED BY THE WARRANTY. THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND 

ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY. 

Governing Law

:  This Limited Warranty shall be governed by the laws of the State of California. Some states do not allow exclusion or limitation of 

incidental or consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not 

apply. This Limited Warranty provides specific legal rights and you may also have other rights which vary from state to state.   

Trademarks:

  

D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their 

respective owners.

 

 

Copyright Statement:

  

No part of this publication or documentation accompanying this product may be reproduced in 

any form or by any means or used to make any derivative such as translation, transformation, or adaptation without 
permission from D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976 
and any amendments thereto.  Contents are subject to change without prior notice.  Copyright 2005 by D-Link 
Corporation/D-Link Systems, Inc. All rights reserved.

 

CE Mark Warning:

  

This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be 

required to take adequate measures. 

FCC Statement:

  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC 

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment 
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 
interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment 
does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following measures: 

•

 

Reorient or relocate the receiving antenna. 

•

 

Increase the separation between the equipment and receiver. 

•

 

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

•

 

Consult the dealer or an experienced radio/TV technician for help. 

For detailed warranty information applicable to products purchased outside the United States, please contact the 
corresponding local D-Link office.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Содержание DES-3010F





































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DES-3010F

D-Link DSL-2750U Setup preview
DSL-2750U
Бренд: D-Link Страницы: 14
D-Link DVG-7022S Quick Installation Manual preview
DVG-7022S
Бренд: D-Link Страницы: 7
D-Link DIR-878 Quick Installation Manual preview
DIR-878
Бренд: D-Link Страницы: 41
Sagem 2604 Quick Installation Manual preview
2604
Бренд: Sagem Страницы: 19
Vanguard 340 Installation Manual preview
340
Бренд: Vanguard Страницы: 121
Garland INT10G10SP2 User Manual preview
INT10G10SP2
Бренд: Garland Страницы: 6
Microsoft Azure StorSimple 8100 Hardware Installation Manual preview
Azure StorSimple 8100
Бренд: Microsoft Страницы: 12
Lancom GS-2310P Instruction Manual preview
GS-2310P
Бренд: Lancom Страницы: 25
Paradyne Hotwire 6341 Installation Instructions Manual preview
Hotwire 6341
Бренд: Paradyne Страницы: 23
Draytek Vigor 2760 Series Quick Start Manual preview
Vigor 2760 Series
Бренд: Draytek Страницы: 54
Netis DL4305 Quick Installation Manual preview
DL4305
Бренд: Netis Страницы: 16
Ravpower RD-WD009 User Manual preview
RD-WD009
Бренд: Ravpower Страницы: 27
ZyXEL Communications P-660W-T1 v2 User Manual preview
P-660W-T1 v2
Бренд: ZyXEL Communications Страницы: 244
NETGEAR GSM7224v2 - Layer 2 Managed Gigabit Switch Datasheet preview
GSM7224v2 - Layer 2 Managed Gigabit Switch
Бренд: NETGEAR Страницы: 3
3Com 3C433279A Release Note preview
3C433279A
Бренд: 3Com Страницы: 12
ATEN Slideaway CL1008 User Manual preview
Slideaway CL1008
Бренд: ATEN Страницы: 77
ADTRAN NetVanta Analog Modem Dial Backup Interface Module Quick Start Manual preview
NetVanta Analog Modem Dial Backup Interface Module
Бренд: ADTRAN Страницы: 2
ADTRAN Express L128FP User Manual preview
Express L128FP
Бренд: ADTRAN Страницы: 161

Бренды по названию

Популярные бренды

Загрузить еще бренды