manualshive.com logo in svg

D-Link DES-3010F, Руководство пользователя

D-Link DES-3010F - многофункциональный коммутатор с гибкими настройками через командный интерфейс. Скачайте бесплатное руководство по использованию через manualshive.com для настройки и управления устройством. Получите доступ к полному описанию функций и возможностей коммутатора в руководстве по командной строке.

Поделиться
Скачать
background image

 

 

 

 

Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited Warranty: 
 

•

 

Only to the person or entity that originally purchased the product from D-Link or its authorized reseller or distributor, and 

•

 

Only for products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. Possessions or 

Protectorates, U.S. Military Installations, or addresses with an APO or FPO. 

 

Limited Warranty:

  

D-Link warrants that the hardware portion of the D-Link product described below (“Hardware”) will be free from material defects 

in workmanship and materials under normal use from the date of original retail purchase of the product, for the period set forth below (“Warranty 

Period”), except as otherwise stated herein.  

 

Limited Lifetime Warranty for the product is defined as follows: 

 

•

 

Hardware: For as long as the original customer/end user owns the product, or five (5) years after product discontinuance, whichever 

occurs first (excluding power supplies and fans) 

•

 

Power supplies and fans: Three (3) Year 

•

 

Spare parts and spare kits: Ninety (90) days 

 

The customer's sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will be, at D-Link’s option, 

to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund the actual purchase price 

paid.  Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office.  The replacement hardware need not be new or 

have an identical make, model or part.  D-Link may, at its option, replace the defective Hardware or any part thereof with any reconditioned product 

that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware.  Repaired or 

replacement hardware will be warranted for the remainder of the original Warranty Period or ninety (90) days, whichever is longer, and is subject to 

the same limitations and exclusions.  If a material defect is incapable of correction, or if D-Link determines that it is not practical to repair or replace 

the defective Hardware, the actual price paid by the original purchaser for the defective Hardware will be refunded by D-Link upon return to D-Link 

of the defective Hardware.  All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded, shall become the 

property of D-Link upon replacement or refund. 

 

Limited Software Warranty:  

D-Link warrants that the software portion of the product (“Software”) will substantially conform to D-Link’s then 

current functional specifications for the Software, as set forth in the applicable documentation, from the date of original retail purchase of the 

Software for a period of ninety (90) days (“Software Warranty Period”), provided that the Software is properly installed on approved hardware and 

operated as contemplated in its documentation. D-Link further warrants that, during the Software Warranty Period, the magnetic media on which D-

Link delivers the Software will be free of physical defects.  The customer's sole and exclusive remedy and the entire liability of D-Link and its 

suppliers under this Limited Warranty will be, at D-Link’s option, to replace the non-conforming Software (or defective media) with software that 

substantially conforms to D-Link’s functional specifications for the Software or to refund the portion of the actual purchase price paid that is 

attributable to the Software.  Except as otherwise agreed by D-Link in writing, the replacement Software is provided only to the original licensee, 

and is subject to the terms and conditions of the license granted by D-Link for the Software.  Replacement Software will be warranted for the 

remainder of the original Warranty Period and is subject to the same limitations and exclusions.  If a material non-conformance is incapable of 

correction, or if D-Link determines in its sole discretion that it is not practical to replace the non-conforming Software, the price paid by the original 

licensee for the non-conforming Software will be refunded by D-Link; provided that the non-conforming Software (and all copies thereof) is first 

returned to D-Link.  The license granted respecting any Software for which a refund is given automatically terminates. 

 

Non-Applicability of Warranty:  

The Limited Warranty provided hereunder for Hardware and Software portions of D-Link's products will not be 

applied to and does not cover any refurbished product and any product purchased through the inventory clearance or liquidation sale or other sales 

in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case, the product is 

being sold "As-Is" without any warranty whatsoever including, without limitation, the Limited Warranty as described herein, notwithstanding anything 

stated herein to the contrary.

  

 

 
Submitting A Claim

:  The customer shall return the product to the original purchase point based on its return policy.  In case the return policy 

period has expired and the product is within warranty, the customer shall submit a claim to D-Link as outlined below: 

 

  

•

 

The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance 

in sufficient detail to allow D-Link to confirm the same, along with proof of purchase of the product (such as a copy of the dated purchase 

invoice for the product) if the product is not registered. 

•

 

The customer must obtain a Case ID Number from D-Link Technical Support at 1-877-453-5465, who will attempt to assist the customer in 

resolving any suspected defects with the product.  If the product is considered defective, the customer must obtain a Return Material 

Authorization (“RMA”) number by completing the RMA form and entering the assigned Case ID Number at 

https://rma.dlink.com/

. 

•

 

After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package to 

ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outside of the package.  Do not include 

any manuals or accessories in the shipping package.  D-Link will only replace the defective portion of the product and will not ship back any 

accessories. 

•

 

The customer is responsible for all in-bound shipping charges to D-Link.  No Cash on Delivery (“COD”) is allowed.  Products sent COD 

will either be rejected by D-Link or become the property of D-Link.  Products shall be fully insured by the customer and shipped to 

D-Link 

Systems, Inc., 17595 Mt. Herrmann, Fountain Valley, CA 92708

.  D-Link will not be held responsible for any packages that are lost in transit 

to D-Link.  The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link.  

Return shipping charges shall be prepaid by D-Link if you use an address in the United States, otherwise we will ship the product to you freight 

collect. Expedited shipping is available upon request and provided shipping charges are prepaid by the customer. 

 

D-Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements, or for which an RMA 

number is not visible from the outside of the package. The product owner agrees to pay D-Link’s reasonable handling and return shipping charges 

for any product that is not packaged and shipped in accordance with the foregoing requirements, or that is determined by D-Link not to be defective 

or non-conforming. 

 

What Is Not Covered: 

The Limited Warranty provided herein by D-Link does not cover: Products that, in D-Link’s judgment, have been subjected to 

abuse, accident, alteration, modification, tampering, negligence, misuse, faulty installation, lack of reasonable care, repair or service in any way that 

is not contemplated in the documentation for the product, or if the model or serial number has been altered, tampered with, defaced or removed; 

Initial installation, installation and removal of the product for repair, and shipping costs; Operational adjustments covered in the operating manual for 

the product, and normal maintenance; Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage;  Any 

hardware, software, firmware or other products or services provided  by anyone other than D-Link; and Products that have been purchased from 

inventory clearance or liquidation sales or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation 

pertaining to the product.  While necessary maintenance or repairs on your Product can be performed by any company, we recommend that you 

use only an Authorized D-Link Service Office. Improper or incorrectly performed maintenance or repair voids this Limited Warranty. 

 

Содержание DES-3010F





































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DES-3010F

D-Link DIR-862L Manual preview
DIR-862L
Бренд: D-Link Страницы: 4
D-Link DIR-860L Quick Install Manual preview
DIR-860L
Бренд: D-Link Страницы: 2
D-Link DIR-850L Resetting Manual preview
DIR-850L
Бренд: D-Link Страницы: 9
D-Link DIR-850L Setup And Installation Manual preview
DIR-850L
Бренд: D-Link Страницы: 8
D-Link DIR-865L Specifications preview
DIR-865L
Бренд: D-Link Страницы: 3
D-Link DIR-867 Quick Install Manual preview
DIR-867
Бренд: D-Link Страницы: 28
D-Link DIR-X1530 Quick Start Manual preview
DIR-X1530
Бренд: D-Link Страницы: 2
D-Link DSL-2540B - ADSL2/2+ Modem With EN Router Quick Install Manual preview
DSL-2540B - ADSL2/2+ Modem With EN Router
Бренд: D-Link Страницы: 12
D-Link DIR-882 Quick Installation Manual preview
DIR-882
Бренд: D-Link Страницы: 62
C&H Technologies EM405-8 Manual preview
EM405-8
Бренд: C&H Technologies Страницы: 46
Dahua Smart 1U Quick Start Manual preview
Smart 1U
Бренд: Dahua Страницы: 24
Netopia 3346-ENT Getting Started Manual preview
3346-ENT
Бренд: Netopia Страницы: 38
H3C S12500R-2L Installation Manual preview
S12500R-2L
Бренд: H3C Страницы: 77
Teletronics International TT 900 User Manual preview
TT 900
Бренд: Teletronics International Страницы: 57
Acorn Computers Limited A300 Series Quick Start Manual preview
A300 Series
Бренд: Acorn Computers Limited Страницы: 2
DHD Power Cruiser 52/XR Manual preview
52/XR
Бренд: DHD Power Cruiser Страницы: 60
Acces PCI-COM-1S User Manual preview
PCI-COM-1S
Бренд: Acces Страницы: 21
Hame 434T User Manual preview
434T
Бренд: Hame Страницы: 37

Бренды по названию

Популярные бренды

Загрузить еще бренды