manualshive.com logo in svg

D-Link DES-3010F, Руководство пользователя

D-Link DES-3010F - многофункциональный коммутатор с гибкими настройками через командный интерфейс. Скачайте бесплатное руководство по использованию через manualshive.com для настройки и управления устройством. Получите доступ к полному описанию функций и возможностей коммутатора в руководстве по командной строке.

Поделиться
Скачать
background image

DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual 

 

59

D-Link Single IP Management 

Single IP Management (SIM) Overview 

Simply put, D-Link Single IP Management is a concept that will stack switches together over Ethernet 
instead of using stacking ports or modules. There are some advantages in implementing the "Single IP 
Management" feature: 

1.

 

SIM can simplify management of small workgroups or wiring closets while scaling the network to 
handle increased bandwidth demand. 

2.

 

SIM can reduce the number of IP address needed in your network. 

3.

 

SIM can eliminate any specialized cables for stacking connectivity and remove the distance barriers 
that typically limit your topology options when using other stacking technology.  

Switches using D-Link Single IP Management (labeled here as SIM) must conform to the following rules: 

•

 

SIM is an optional feature on the Switch and can easily be enabled or disabled through the Command Line Interface or 
Web Interface. SIM grouping has no effect on the normal operation of the Switch in the user's network. 

•

 

There are three classifications for SIM. The 

Commander Switch (CS)

, which is the master switch of the group, 

Member Switch (MS)

, which is a switch that is recognized by the CS a member of a SIM group, and a 

Candidate 

Switch (CaS)

, which is a Switch that has a physical link to the SIM group but has not been recognized by the CS as a 

member of the SIM group. 

•

 

A SIM group can only have one Commander Switch (CS). 

•

 

All switches in a particular SIM group must be in the same IP subnet (broadcast domain). Members of a SIM group 
cannot cross a router. 

•

 

A SIM group accepts up to 33 switches (numbered 0-32), including the Commander Switch (numbered 0). 

There is no limit to the number of SIM groups in the same IP subnet (broadcast domain), however a single 
switch can only belong to one group. 
If multiple VLANs are configured, the SIM group will only utilize the default VLAN on any switch. 
SIM allows intermediate devices that do not support SIM. This enables the user to manage switches that are 
more than one hop away from the CS. 
The SIM group is a group of switches that are managed as a single entity. SIM switches may take on three 
different roles: 

1.

 

Commander Switch (CS)

 - This is a switch that has been manually configured as the controlling 

device for a group, and takes on the following characteristics:  

•

 

 It has an IP Address. 

•

 

 It is not a commander switch or member switch of another Single IP group. 

•

 

 It is connected to the member switches through its management VLAN. 

2.

 

Member Switch (MS)

 - This is a switch that has joined a single IP group and is accessible from the 

CS, and it takes on the following characteristics: 

•

 

 It is not a CS or MS of another Single IP group. 

•

 

 It is connected to the CS through the CS management VLAN. 

3.

 

Candidate Switch (CaS)

 - This is a switch that is ready to join a SIM group but is not yet a member 

of the SIM group. The Candidate Switch may join the SIM group of a switch by manually 
configuring it to be a MS of a SIM group. A switch configured as a CaS is not a member of a SIM 
group and will take on the following characteristics: 

•

 

 It is not a CS or MS of another Single IP group. 

•

 

 It is connected to the CS through the CS management VLAN 

After configuring one switch to operate as the CS of a SIM group, additional switches may join the group 
through a direct connection to the Commander switch. Only the Commander switch will allow entry to the 
candidate switch enabled for SIM. The CS will then serve as the in band entry point for access to the MS. 
The CS's IP address will become the path to all MS's of the group and the CS's Administrator's password, 
and/or authentication will control access to all MS's of the SIM group. 
With SIM enabled, the applications in the CS will redirect the packet instead of executing the packets. The 
applications will decode the packet from the administrator, modify some data, then send it to the MS. After 

Содержание DES-3010F





































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DES-3010F

D-Link NetDefend DFL-260E Reference Manual preview
NetDefend DFL-260E
Бренд: D-Link Страницы: 328
D-Link ShareCenter Pulse DNS-320 Quick Install Manual preview
ShareCenter Pulse DNS-320
Бренд: D-Link Страницы: 2
D-Link DFL-210 - NetDefend - Security Appliance Firewall Registration Manual preview
DFL-210 - NetDefend - Security Appliance
Бренд: D-Link Страницы: 19
D-Link DFL-M510 Faq preview
DFL-M510
Бренд: D-Link Страницы: 22
Dahua N300 Quick Start Manual preview
N300
Бренд: Dahua Страницы: 12
D-Link NetDefend DFL-1600 Quick Manual preview
NetDefend DFL-1600
Бренд: D-Link Страницы: 23
3onedata IES615-2D Series Quick Installation Manual preview
IES615-2D Series
Бренд: 3onedata Страницы: 3
3One data 7212 User Manual preview
7212
Бренд: 3One data Страницы: 5
3onedata IEM615 Series Hardware User Manual preview
IEM615 Series
Бренд: 3onedata Страницы: 33
Cabletron Systems Netlink FRX4000 Installation And Setup Manual preview
Netlink FRX4000
Бренд: Cabletron Systems Страницы: 8
Cabletron Systems 9C300-1 Upgrade Instructions preview
9C300-1
Бренд: Cabletron Systems Страницы: 4
Cabletron Systems MMAC-Plus 9F106-02 Reference Manual preview
MMAC-Plus 9F106-02
Бренд: Cabletron Systems Страницы: 7
Paradyne 7610 Overview preview
7610
Бренд: Paradyne Страницы: 2
Yamaha mLAN Driver Manual Book preview
mLAN Driver
Бренд: Yamaha Страницы: 24
Yamaha DSP1D Supplementary Manual preview
DSP1D
Бренд: Yamaha Страницы: 5
D-Link DSR-500 User Manual preview
DSR-500
Бренд: D-Link Страницы: 213
H3C S10500 Series Mpls Configuration Manual preview
S10500 Series
Бренд: H3C Страницы: 400
NBase NH 210 Installation And User Manual preview
NH 210
Бренд: NBase Страницы: 18

Бренды по названию

Популярные бренды

Загрузить еще бренды