manualshive.com logo in svg

D-Link DES-3010F, Руководство пользователя

D-Link DES-3010F - многофункциональный коммутатор с гибкими настройками через командный интерфейс. Скачайте бесплатное руководство по использованию через manualshive.com для настройки и управления устройством. Получите доступ к полному описанию функций и возможностей коммутатора в руководстве по командной строке.

Поделиться
Скачать
background image

 

 

CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, 
WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, LOSS OF INFORMATION OR 
DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-
LINK FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING 
TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, 
EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE 
REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, 
REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON-CONFORMING PRODUCT. 
 

GOVERNING LAW

: This Limited Warranty shall be governed by the laws of the state of California. 

 
Some states do not allow exclusion or limitation of incidental or consequential damages, or limitations on 
how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This limited 
warranty provides specific legal rights and the product owner may also have other rights which vary from 
state to state. 
 

Trademarks 

Copyright 2008 D-Link Corporation. Contents subject to change without prior notice. D-Link is a registered 
trademark of D-Link Corporation/D-Link Systems, Inc. All other trademarks belong to their respective 
proprietors. 
 

Copyright Statement 

No part of this publication may be reproduced in any form or by any means or used to make any derivative 
such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link 
Systems Inc., as stipulated by the United States Copyright Act of 1976. 
 

FCC Warning 
 

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to 
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial environment. This equipment generates, uses, 
and can radiate radio frequency energy and, if not installed and used in accordance with this manual, may 
cause harmful interference to radio communications. Operation of this equipment in a residential area is 
likely to cause harmful interference in which case the user will be required to correct the interference at his 
own expense. 

 

 
 
 

 

Содержание DES-3010F





































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DES-3010F

D-Link DSL-2750U Setup preview
DSL-2750U
Бренд: D-Link Страницы: 14
D-Link DVG-7022S Quick Installation Manual preview
DVG-7022S
Бренд: D-Link Страницы: 7
D-Link DIR-878 Quick Installation Manual preview
DIR-878
Бренд: D-Link Страницы: 41
3Com 3CR860-95 - OfficeConnect Secure Router Features And Benefits preview
3CR860-95 - OfficeConnect Secure Router
Бренд: 3Com Страницы: 2
3Com 3C905-TX Installation Manual preview
3C905-TX
Бренд: 3Com Страницы: 26
Abocom MH200 Quick Installation Manual preview
MH200
Бренд: Abocom Страницы: 11
Abocom CWB1000 Quick Installation Manual preview
CWB1000
Бренд: Abocom Страницы: 19
Wattle Pegasus Quick Installation Manual preview
Pegasus
Бренд: Wattle Страницы: 6
Baicells Nova430i Quick Manual preview
Nova430i
Бренд: Baicells Страницы: 8
Lantronix Device Server UDS 10 Hardware Manual preview
Device Server UDS 10
Бренд: Lantronix Страницы: 8
N-Tron 7018 User Manual & Installation Manual preview
7018
Бренд: N-Tron Страницы: 138
Quantum Scalar 50 Upgrade Instructions preview
Scalar 50
Бренд: Quantum Страницы: 20
Juniper TX MATRIX PLUS Hardware Manual preview
TX MATRIX PLUS
Бренд: Juniper Страницы: 502
Grasslin TOWERCHRON DP72 Programming Manual preview
TOWERCHRON DP72
Бренд: Grasslin Страницы: 2
Teknim TWM-1886 Installation & User Manual preview
TWM-1886
Бренд: Teknim Страницы: 10
Zalip CDG561 WE~P21 User Manual preview
CDG561 WE~P21
Бренд: Zalip Страницы: 77
Linksys EtherFast LNE100TX ver. 5 User Manual preview
EtherFast LNE100TX ver. 5
Бренд: Linksys Страницы: 42
UTStarcom UT-300R2U User Manual preview
UT-300R2U
Бренд: UTStarcom Страницы: 71

Бренды по названию

Популярные бренды

Загрузить еще бренды