DES-30XX Layer 2 Switch CLI Reference Manual
158
show sim
always have the candidate role.
Discovery Interval - Time in seconds the Switch will send discovery
packets out over the network.
Hold time – Displays the time in seconds the Switch will hold
discovery results before dropping it or utilizing it.
Parameters
candidates <candidate_id 1-100>
- Entering this parameter will
display information concerning candidates of the SIM group. To
view a specific candidate, include that candidate’s id number, listed
from 1 to 100.
members <member_id 1-32>
- Entering this parameter will display
information concerning members of the SIM group. To view a
specific member, include that member’s ID number, listed from 1 to
32.
group commander_mac <macaddr>
- Entering this parameter will
display information concerning the SIM group of a commander
device, identified by its MAC address.
neighbor
– Entering this parameter will display neighboring devices
of the Switch. A SIM neighbor is defined as a switch that is
physically connected to the Switch but is not part of the SIM group.
This screen will produce the following results:
•
Port – Displays the physical port number of the commander
switch where the uplink to the neighbor switch is located.
•
MAC Address – Displays the MAC Address of the neighbor
switch.
•
Role – Displays the role (CS, CaS, MS) of the neighbor
switch.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To show the SIM information in detail:
DES-3026:4#show sim
Command: show sim
SIM Version : VER-1.50
Firmware Version : Build 2.00.020
Device Name :
MAC Address : 00-35-26-11-11-00
Capabilities : L3
Platform : DES-3026 L2 Switch
SIM State : Enabled
Role State : Commander
Discovery Interval : 30 sec
Hold Time : 100 sec
DES-3026:4#
