DES-30XX Layer 2 Switch CLI Reference Manual
148
config dst
•
<start_week 1-4,last>
- The number of the week during the month
in which DST begins where 1 is the first week, 2 is the second
week and so on, last is the last week of the month.
e_week
- Configure the week of the month in which DST ends.
•
<end_week 1-4,last>
- The number of the week during the month
in which DST ends where 1 is the first week, 2 is the second week
and so on, last is the last week of the month.
s_wday
– Configure the day of the week in which DST begins.
•
<start_weekday sun-sat>
- The day of the week in which DST
begins expressed using a three character abbreviation (sun, mon,
tue, wed, thu, fri, sat)
e_wday
- Configure the day of the week in which DST ends.
•
<end_weekday sun-sat>
- The day of the week in which DST
ends expressed using a three character abbreviation (sun, mon,
tue, wed, thu, fri, sat)
s_mth
- Configure the month in which DST begins.
•
<start_mth 1-12>
- The month to begin DST expressed as a
number.
e_mth
- Configure the month in which DST ends.
•
<end_mth 1-12>
- The month to end DST expressed as a
number.
s_time
– Configure the time of day to begin DST.
•
<start_time hh:mm>
- Time is expressed using a 24-hour clock, in
hours and minutes.
e_time
- Configure the time of day to end DST.
•
<end_time hh:mm>
- Time is expressed using a 24-hour clock, in
hours and minutes.
s_date
- Configure the specific date (day of the month) to begin DST.
•
<start_date 1-31>
- The start date is expressed numerically.
e_date
- Configure the specific date (day of the month) to begin DST.
•
<end_date 1-31>
- The end date is expressed numerically.
offset [30 | 60 | 90 | 120]
- Indicates number of minutes to add or to subtract
during the summertime. The possible offset times are 30, 60, 90, 120. The
default value is 60.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To configure daylight savings time on the Switch:
