DES-30XX Layer 2 Switch CLI Reference Manual
116
create cpu access_profile
packet_content_mask
– Specifies that the Switch will mask the packet
header beginning with the offset value specified as follows:
•
offset_0-15
- Enter a value in hex form to mask the packet from
byte 0 to byte 15.
•
offset_16-31
- Enter a value in hex form to mask the packet from
byte 16 to byte 31.
•
offset_32-47
- Enter a value in hex form to mask the packet from
byte 32 to byte 47.
•
offset_48-63
- Enter a value in hex form to mask the packet from
byte 48 to byte 63.
•
offset_64-79
- Enter a value in hex form to mask the packet from
byte 64 to byte 79.
ipv6
– Denotes that IPv6 packets will be examined by the Switch for
forwarding or filtering based on the rules configured in the
config cpu
access_profile
command for IPv6. IPv6 packets may be identified by the
following:
•
class
– Entering this parameter will instruct the Switch to examine
the
class
field of the IPv6 header. This class field is a part of the
packet header that is similar to the Type of Service (ToS) or
Precedence bits field in IPv4.
•
flowlabel
– Entering this parameter will instruct the Switch to
examine the
flow label
field of the IPv6 header. This flow label field
is used by a source to label sequences of packets such as non-
default quality of service or real time service packets.
•
source_ipv6_mask <ipv6mask>
- Specifies an IP address mask for
the source IPv6 address.
•
destination_ipv6_mask <ipv6mask>
- Specifies an IP address mask
for the destination IPv6 address.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To create a cpu access profile:
DES-3026:4#create cpu access_profile profile_id 1 ip vlan source_ip_mask
20.0.0.0 destination_ip_mask 10.0.0.0 dscp icmp type code
Command: create cpu access_profile profile_id 1 ip vlan source_ip_mask
20.0.0.0 destination_ip_mask 10.0.0.0 dscp icmp type code
Success.
DES-3026:4#
delete cpu access_profile
Purpose
Used to delete a previously created access profile or CPU access profile.
Syntax
delete cpu access_profile profile_id <value 1-3>
Description
The
delete cpu access_profile
command is used to delete a previously
t d CPU
fil
