DES-30XX Layer 2 Switch CLI Reference Manual
134
To configure 802.1x authentication parameters for ports 1 – 20:
DES-3026:4#config 802.1x auth_parameter ports 1 – 20 direction both
Command: config 802.1x auth_parameter ports 1 – 20 direction both
Success.
DES-3026:4#
config 802.1x auth_protocol
Purpose
Used to configure the 802.1x authentication protocol on the
Switch.
Syntax
config 802.1x auth_protocol [local | radius_eap]
Description
The
config 802.1x auth_protocol
command enables you to
configure the authentication protocol.
Parameters
[local | radius_eap]
– Specify the type of authentication protocol
desired.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To configure the authentication protocol on the Switch:
DES-3026:4# config 802.1x auth_protocol local
Command: config 802.1x auth_protocol local
Success.
DES-3026:4#
config 802.1x init
Purpose
Used to initialize the 802.1x function on a range of ports.
Syntax
config 802.1x init [port_based ports [<portlist> | all] | mac_based ports
[<portlist> | all] {mac_address <macaddr>}]
Description
The
config 802.1x init
command is used to immediately initialize the
802.1x functions on a specified range of ports or for specified MAC
addresses operating from a specified range of ports.
Parameters
port_based ports
– This instructs the Switch to initialize 802.1x functions
based only on the port number. Ports approved for initialization can then be
specified.
<portlist>
−
Specifies a port or range of ports to be initialized.
all
−
Specifies all of the ports on the Switch to be initialized.
mac_based
- This instructs the Switch to initialize 802.1x functions based
on the MAC address of a device on a specific port or range of ports. MAC
address approved for initialization can then be specified.
ports <portlist>
−
Specifies a port or range of ports.
all
−
Specifies all of the ports on the Switch.
