DES-30XX Layer 2 Switch CLI Reference Manual
160
Example usage:
To view SIM neighbors:
DES-3026:4#show sim neighbor
Command: show sim neighbor
Neighbor Info Table
Port MAC Address Role
------ ------------------ ---------
23 00-35-26-00-11-99 Commander
23 00-35-26-00-11-91 Member
24 00-35-26-00-11-90 Candidate
Total Entries: 3
DES-3026:4#
reconfig
Purpose
Used to connect to a member switch, through the commander switch
using telnet.
Syntax
reconfig [member_id <value 1-32> | exit]
Description
This command is used to reconnect to a member switch using telnet.
Parameters
member_id <value 1-32>
- Select the ID number of the member
switch to configure.
exit
– This command is used to exit from managing the member
switch and will return to managing the commander switch.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To connect to the MS, with member id 2, through the CS, using the command line interface:
DES-3026:4#reconfig member_id 2
Command: reconfig member_id 2
DES-3026:4#
config sim_group
Purpose
Used to add candidates and delete members from the SIM group.
Syntax
config sim_group [add <candidate_id 1-100> {<password>} |
delete <member_id 1-32>]
Description
This command is used to add candidates and delete members from
the SIM group by ID number.
Parameters
add <candidate_id 1-100> <password>
- Use this parameter to
change a candidate switch (CaS) to a member switch (MS) of a SIM
group. The CaS may be defined by its ID number and a password (if
necessary).
