D-Link AirPremier DWL-2210AP, Руководство пользователя

Страница: 33 / 193

32
33
32
When you have reviewed the new configuration, click
Update
to apply the settings and
deploy the access points as a wireless network.
Summary of Settings
When you update the Basic Settings, a summary of the new settings is shown along
with information about next steps.
At initial startup, no security is in place on the access point. An important next step is
to configure security, as described in “Configuring Security” in this manual.
At this point if you click Basic Settings again, the summary of settings page is replaced
by the standard Basic Settings configuration options.
If you choose “are configured automatically”, then
when a new access point is added to the network it
automatically joins the existing cluster . The cluster
configuration is copied to the new access point, and no
manual configuration is required to deploy it.
If you choose “are ignored”, new access points will not
join the cluster; they will be considered standalone . You
need to configure standalone access points manually
by using KickStart Wizard on the CD-ROM and the
Administration Web pages residing on the standalone
access points. (To get to the Web page for a standalone
access point, use its IP address in a URL as follows:
http
: // IPAddressOfAccessPoint .)
Choose the policy you want to put in effect for adding
New Access Points
to the network.
Update Basic Settings
Configuring Basic Settings