D-Link AirPremier DWL-2210AP, Руководство пользователя

Страница: 22 / 193

22 22
KickStart Wizard is an easy-to-use utility for discovering and identifying new D-Link
DWL-2210APs in a network with a DCHP server. KickStart scans the network looking
for access points, and displays ID details on those it finds.
• Keep in mind that KickStart Wizard recognizes and configures only D-Link
DWL-2210APs. Kickstart will not find any other devices.
• Run Kickstart only in the subnet of the “Internal” network (
SSID
). Do not run Kickstart on
the guest subnetwork.
• Kickstart Wizard will find only those access points that have IP addresses. IP addresses
are dynamically assigned to APs if you have a
DHCP server running on the network. Keep
in mind that if you deploy the AP on a network with no DHCP server, the default static IP
address (192.168.0.50) will be used.
Use caution with non-DHCP enabled networks:
Do not deploy more than one new AP on
a non-DHCP network because they will use the same default static IP addresses and
conflict with each other. (For more information, see “Understanding Dynamic and Static IP
Addressing on the D-Link DWL-2210AP” and “How Does the Access Point Obtain an IP
Address at Startup?” )
Run the CD-ROM on a laptop or computer that is connected to the same network as
your access points and use it to step through the discovery process as follows:
1. Insert the CD-ROM
into the CD-ROM drive on
your computer, and click
Kickstart.
The Kickstart Welcome
screen will appear (as
shown on the next page).
Quick Steps for Setup
The DWL-2210AP is DHCP enabled by default. The DWL-2210AP
CD-ROM contains the KickStart Wizard to simplify access point configuration
on a network with a DHCP server. Use Kickstart
only
when there is a DHCP
server in your network.
Step 3. Run KickStart Wizard on the CD-ROM to find access
points on a DHCP network