D-Link AirPremier DWL-2210AP, Руководство пользователя

Страница: 154 / 193

154 154
Configuring an External RADIUS Server to Recognize
the D-Link DWL-2210AP
An external Remote Authentication Dial-in User Server (RADIUS) server running on the
network can support of EAP-TLS smart card/certificate distribution to clients in a Public
Key Infrastructure (PKI) as well as EAP-PEAP user account setup and authentication. By
external RADIUS server, we mean an authentication server external to the access point
itself. This is to distinguish between the scenario in which you use a network RADIUS
server versus one in which you use the
Built-in Authentication Server on the
D-Link DWL-2210AP.
This section provides an example of configuring an external RADIUS server for the
purposes of authenticating and authorizing TLS-EAP certificates from wireless clients
of a particular D-Link DWL-2210AP configured for either “WPA with RADIUS” or “IEEE
802.1x” security modes. The intention of this section is to provide some idea of what
this process will look like; procedures will vary depending on the RADIUS server you
use and how you configure it. For this example, we use the Internet Authentication
Service that
comes with Microsoft Windows 2003 server.
The purpose of this procedure is to identify your D-Link DWL-2210AP as a “client” to the
RADIUS server. The RADIUS server can then handle authentication and authorization
of wireless clients for the AP. This procedure is required
per access point . If you have
more than one access point with which you plan to use an external RADIUS server,
you need to follow these steps for each of those APs.
Keep in mind that the information you need to provide to the RADIUS server about the
access point corresponds to settings on the access point (Advanced > Security) and
vice versa. You should have already provided the RADIUS server IP Address to the
AP; in the steps that follow you will provide the access point address to the RADIUS
server. The RADIUS Key provided on the AP is the “shared secret” you will provide to
the RADIUS server.
Appendix A: Configuring Security Settings on Wireless Clients
This document does not describe how to set up Administrative users on the RADIUS server.
In this example, we assume you already have RADIUS server user accounts configured.
You will need a RADIUS server user name and password for both this procedure and the
following one that describes how to obtain and install a certificate on the wireless client.
Please consult the documentation for your RADIUS server for information on setting up
user accounts.