manualshive.com logo in svg

D-Link AirPremier DWL-2210AP, Руководство пользователя

D-Link AirPremier DWL-2210AP - мощная точка доступа с высокой производительностью и надежностью. Ищите руководство по быстрой установке? Скачайте бесплатное руководство на нашем сайте для получения подробной информации о настройке и использовании этого устройства. manualshive.com - ваш источник бесплатных руководств.

Поделиться
Скачать
background image

190

190

• 

The  original  product  owner  must  obtain  a  Return  Material  Authorization  (“RMA”)  number  from  the 

Authorized D-Link Service Office and, if requested, provide written proof of purchase of the product 

(such as a copy of the dated purchase invoice for the product) before the warranty service is provided.

• 

After an RMA number is issued, the defective product must be packaged securely in the original or other 

suitable shipping package to ensure that it will not be damaged in transit, and the RMA number must be 

prominently marked on the outside of the package.  Do not include any manuals or accessories in the 

shipping package.  D-Link will only replace the defective portion of the Product and will not ship back 

any accessories.

• 

The customer is responsible for all inbound shipping charges to D-Link.  No Cash on Delivery (“COD”) 

is allowed.  Products sent COD will either be rejected by D-Link or become the property of D-Link.  

Products shall be fully insured by the customer. D-Link will not be held responsible for any packages 

that are lost in transit to D-Link.  The repaired or replaced packages will be shipped to the customer 

via UPS Ground or any common carrier selected by D-Link, with shipping charges prepaid. Expedited 

shipping is available if shipping charges are prepaid by the customer and upon request.

• 

Return Merchandise Ship-To Address

USA:

 17595 Mt. Herrmann, Fountain Valley, CA 92708

Canada:

 2180 Winston Park Drive, Oakville, ON, L6H 5W1 (Visit 

http://www.dlink.ca

 for detailed warranty 

information within Canada)

D-Link  may  reject  or  return  any  product  that  is  not  packaged  and  shipped  in  strict  compliance  with  the 

foregoing requirements, or for which an RMA number is not visible from the outside of the package. The 

product owner agrees to pay D-Link’s reasonable handling and return shipping charges for any product that 

is not packaged and shipped in accordance with the foregoing requirements, or that is determined by D-Link 

not to be defective or nonconforming.

What Is Not Covered: 

This limited warranty provided by D-Link does not cover: Products, if in D-Link’s judgment, 

have  been  subjected  to  abuse,  accident,  alteration,  modification,  tampering,  negligence,  misuse,  faulty 

installation, lack of reasonable care, repair or service in any way that is not contemplated in the documentation 

for the product, or if the model or serial number has been altered, tampered with, defaced or removed; Initial 

installation, installation and removal of the product for repair, and shipping costs; Operational adjustments 

covered in the operating manual for the product, and normal maintenance; Damage that occurs in shipment, 

due to act of God, failures due to power surge, and cosmetic damage;  Any hardware, software, firmware 

or other products or services provided  by anyone other than D-Link; Products that have been purchased 

from inventory clearance or liquidation sales or other sales in which D-Link, the sellers, or the liquidators 

expressly disclaim their warranty obligation pertaining to the product.  Repair by anyone other than D-Link 

or an Authorized D-Link Service Office will void this Warranty.

Disclaimer of Other Warranties: 

EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT 

IS PROVIDED “AS-IS” WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING, WITHOUT 
LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 
NON-INFRINGEMENT. IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY 
WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO 
NINETY (90) DAYS. EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED 
HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT 

IS WITH THE PURCHASER OF THE PRODUCT.
 

Limitation of Liability: 

TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY 

CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY 

LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER 

DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES 

FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE 

OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D-LINK’S 

PRODUCT IS CONNECTED WITH, LOSS OF INFORMATION OR DATA CONTAINED IN, STORED ON, OR 

INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK FOR WARRANTY SERVICE) RESULTING 

FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY 

BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY 

OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY 

IS  REPAIR,  REPLACEMENT  OR  REFUND  OF THE  DEFECTIVE  OR  Nonconforming  PRODUCT.   THE 

MAXIMUM LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF 

THE PRODUCT COVERED BY THE WARRANTY. THE FOREGOING EXPRESS WRITTEN WARRANTIES 

AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, 

EXPRESS, IMPLIED OR STATUTORY.

Содержание AirPremier DWL-2210AP


































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AirPremier DWL-2210AP

Baracoda BDPP01 Specifications preview
BDPP01
Бренд: Baracoda Страницы: 2
Baracoda BDPP01 Quick Start Up Manual preview
BDPP01
Бренд: Baracoda Страницы: 2
LD UHF Wireless Series User Manual preview
UHF Wireless Series
Бренд: LD Страницы: 5
Shiro WR54-01 User Manual preview
WR54-01
Бренд: Shiro Страницы: 83
HABITECH RIVI RV65 Quick Setup preview
RIVI RV65
Бренд: HABITECH Страницы: 3
Atlantis Land A07-WA6102X-2 Specification Sheet preview
A07-WA6102X-2
Бренд: Atlantis Land Страницы: 2
APM ALINE-5801A+G Specification Sheet preview
ALINE-5801A+G
Бренд: APM Страницы: 2
Draytek Vigor 2104P Declaration Of Conformity preview
Vigor 2104P
Бренд: Draytek Страницы: 1
Linksys FGMM1000 User Manual preview
FGMM1000
Бренд: Linksys Страницы: 30
Linksys BEFW11S4-AT User Manual preview
BEFW11S4-AT
Бренд: Linksys Страницы: 31
Linksys E5600 User Manual preview
E5600
Бренд: Linksys Страницы: 135
Pioneer CS374U-APP User Manual preview
CS374U-APP
Бренд: Pioneer Страницы: 12
Sony PCWA-AR800 - Wireless Lan Router Troubleshooting Manual preview
PCWA-AR800 - Wireless Lan Router
Бренд: Sony Страницы: 2
Sony Vaio PCWA-AR800 Operating Instructions preview
Vaio PCWA-AR800
Бренд: Sony Страницы: 2
Sony PCWA-AR800 Quick Start Manual preview
PCWA-AR800
Бренд: Sony Страницы: 2
Sony VGP-MR100U - Room Link 2 Specifications preview
VGP-MR100U - Room Link 2
Бренд: Sony Страницы: 2
Sony CP-AD2 Operating Instructions preview
CP-AD2
Бренд: Sony Страницы: 2
Sony PCWA-AR300 - VAIO Wireless Router Troubleshooting Manual preview
PCWA-AR300 - VAIO Wireless Router
Бренд: Sony Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды