D.A.C.E SPRINT, Руководство пользователя

Страница: 10 / 21

10
16 V AC
220 V AC( from mains supply)
ELECTRICAL WIRING (S
PRINT
& CONDO )
·
The transformer must be plugged into a normal plug socket in the house. 16 Volts AC is then run
directly to the PC board 16V AC connection. The distance between the transformer and the motor
should not exceed 50 meters.
·
The cable should be run in a
3
00 mm deep trench in a water proof conduit and must be terminated
inside the motor.
·
There must be no joins in the cable underground.
·
The cable should be a
two
core 1.5mm cable. DO NOT USE COMMUNICATION CABLE AS THIS
WILL VOID ANY WARRANTY AND IS ILLEGAL.
NOTE: the transformer must not be opened in any way as this may cause electrical shock
Connect from the transformer 16Volts AC to the 16v AC on the main PC board.
WIRING DIAGRAM FROM TRANSFORMER TO CHARGER (S
PRINT
& CONDO)
The following section explains how the wiring should be done for the CONDO and S
PRINT
motors
only.