1
2
When anchoring the motor it is important to ensure that the following points are checked.
·
The electrical cable is in position.
·
The concrete is fully set.
·
The motor foundation mountings are secure and can not move or become loose.
·
The motor should be set level and parallel to the gate.
·
The motor must be set above the flood level or if this is not possible, a flood proof wall should
be constructed around the motor.
After placing the motor onto
the three jackup bolts, place
the three clamping nuts and
washers over the bolts to
clamp the motor in place.
TOP VIEW
Gate in fully closed position
Antilift device and
Rollers
PC BOARD
Concrete
plinth
8mm Coach screws in plugs
PC board
Jackup nuts for
adjusting the motor
height.
SIDE VIEW
ENSURE THAT THE MOTOR IS MOUNTED LEVEL
SECURING THE MOTOR TO THE FOUNDATION PLATE
