NOTICE
Make sure that the cover lock button is down during the welding
and aligning operation.
NOTICE
Cover must be closed for the instrument to operate. The cover
interlock will only allow it to be opened when it is safe. The cover
lock button pops out to indicate that the cover is released and can
be opened.
NOTICE
Improper use of tube data may cause damage to the unit and is not
covered under the warranty.
For a list of tubing types that have been tested for Sterile Tube Fuser - Wet, refer to
Section 8.2 Compatible tubing for, on page 71
Maintenance
WARNING
Electrical shock hazard. All repairs should be done by service
personnel authorized by Cytiva. Do not open any covers or replace
parts unless specifically stated in the user documentation.
WARNING
Disconnect power. Always disconnect power from the instru-
ment before performing any maintenance task.
WARNING
If a fuse requires repeated replacement, do not continue to use the
instrument. Contact an authorized service engineer.
2 Safety instructions
2.1 Safety precautions
18
Sterile Tube Fuser - Wet Operating Instructions 29024010 AD
