Getting Started with EZ-
PD™ CCG3
Document No. 002-00210 Rev. *A
5
1.5
CCG3 Resources
lists the web resources available to help you design end applications using CCG3 devices.
Table 1
.
CCG3 Design Resources
Category
Available Resources
Datasheet
Hardware
– Contains documentation and design files
Application Notes
– Hardware Design Guidelines for Dual Role
Port Applications Using EZ-PD USB
Type-C Controllers
Programming Specifications
Document
Programming specifications
– Provides guidelines on how to program the flash memory of
CCG3 devices
Host PC Software
– GUI-based Windows application to help you configure CCGx
controllers
3.3 SP2 or later (firmware development tool)
3.24.2 or later (firmware programming tool)
Debugging Tools
– Includes EZ-PD Analyzer Utility and documentation
Videos
USB Type-C 101 Video Training Series
Other Collateral
CCG3 specific Knowledge Base Articles
Note:
A basic introduction to Type-C and how to use Cypress' Type-C products can be found in the
of short videos (also listed above).
2
CCG3 Hardware Details
This section discusses the hardware to be used for getting started with the CCG3 device family. It focuses on the
CY4531 EZ-PD CCG3 EVK and the CY4500 EZ-PD Protocol Analyzer.
2.1
CY4531 EZ-PD CCG3 EVK
The CY4531 EZ-PD CCG3 EVK consists of a base board and a daughter card. The CCG3 device is mounted on the
daughter card, which is connected to the base board to enable
the CCG3 device’s Type-C port functionality.
shows a block diagram of the CY4531 EZ-PD CCG3 EVK architecture.
