CYP CH-U331TR Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 60

CYP CH-U331TR Скачать руководство пользователя страница 30

25

Operation Mode:

Sets the USB extension mode. Available

options are Auto, Active on link (Unicast optimized), and Active per

request (Multicast optimized). Auto mode is set by default and will

automatically select the correct mode depending on the broadcast

mode of the unit.

Compatibility Mode:

These troubleshooting options enable

specialized optimizations to solve issues when a mouse or touch panel

is not responding properly. They should normally be left unchecked.

Note: Some options are not available in Receiver mode.

5) Serial over IP (Both Modes):

This section provides controls for the

serial over IP extension functionality, including enabling/disabling serial

support and setting the RS-232 data configuration.

Enable Serial over IP (Receiver Mode Only):

Unchecking this

checkbox will completely disable support for serial streaming to this

unit. This option should generally remain checked, but, if serial support

is not required, disabling this feature can save a very small amount of

bandwidth.

Serial Settings:

Set the desired baud rate, data bits, parity, and stop

bit for the RS-232 signal to extend.

Note: The transmitter and receiver must have the same serial settings.

«
...
28
29
30
31
32
...
»

Содержание CH-U331TR





























































Отзывы:

Нет отзывов