CYP CH-U331TR, Руководство по эксплуатации, Страница: 21 / 60

16
6.6.2 VIDEO WALL TAB
The Video Wall tab allows user to design, edit and manipulate a video wall
system created using multiple receiver units connected to identical displays.
The bezel and video size of the displays being used, as well as the horizontal
and vertical monitor count, is defined here. Video stretch and rotation
can also be controlled on this tab. Receivers in the video wall’s group (all
receivers sharing the same channel) can be controlled by any other unit
within the same group.
Note: The Video Wall tab is accessible when the unit is in both Transmitter
and Receiver Mode, however video wall settings only have an effect on
transceivers in Receiver Mode, or normal receivers.
When saving changes on the Video Wall tab, remember to select the
appropriate “Apply To:” target unit before pressing the “Apply” button. To
make changes to the unit you are currently connected to, select “This” as the
target. Otherwise, select the IP address of the receiver (Client) you want to
apply changes to from the “Apply To:” drop down.
Note: While it is possible to create small video walls using unicast mode, in
order to more efficiently use the available network bandwidth, it is strongly
recommended to only use multicast mode when creating video walls.
1) Bezel and Gap Compensation: This section of the Video Wall tab is
used to define the physical dimensions of each display being used in the
video wall. Accurate measurements are needed of the monitor’s outer
frame (OW, OH) and the video screen (VW, VH). The measurements
may be made using any unit format (inches, mm, cm, etc.) as long as
ALL measurements in the same wall are made using the exact same
units and the numbers are integers.