CYP CH-U331TR, Руководство по эксплуатации, Страница: 17 / 60

12
6.6 WebGUI Control
All major functions of the unit, including status, streaming method, streaming
channel selection, output resolution, video wall configuration, EDID
management, Ethernet settings, and reset/firmware functions are controllable
via multiple tabs in the WebGUI interface allowing for reasonably intuitive
operation.
Each transmitter, receiver, or transceiver is controlled by its own WebGUI
interface which may be accessed by opening a standard web browser on
a PC and typing in the IP address of the unit you wish to connect to. On a
transceiver unit, the IP address of a unit can be obtained simply by checking
the information screen within the OSD menu, accessed by pressing the
menu button.
On stand-alone transmitters/receivers you can discover the IP address by
checking the status OSD that is displayed when there is no live video source
or no live link. Breaking the link is accomplished by pressing and holding
the “LINK” button on the front of the unit for 3 seconds (The LINK light will
blink rapidly, then turn off). Once the link is broken, each connected receiver
will output a 640×480 black screen with OSD text at the bottom identifying
its own IP address (Local IP), as well as the IP address of the transmitter
(Remote IP) that shares the same broadcasting channel with it (channel 0 by
default). After obtaining the IP address information, press and hold the “LINK”
button again for 3 seconds to return the unit to normal operation (The LINK
light will light up solid yellow).
FW: 15-Nov-10 4298
Local IP: 169.254.9.180
Remote IP: 169.254.11.173
ID: FFFFFFFFFFFF
After connecting to a unit’s WebGUI, you will find a screen containing
multiple tabs for each functionality area of the unit. The individual tabs and
functions will be introduced in the following sections.
Note: AVoIP streaming uses a large amount of bandwidth (especially at
higher resolutions) and a Gigabit Ethernet network switch with jumbo frame
support and IGMP snooping is required. A professional managed switch with
VLAN support is strongly recommended. Please note that most consumer-
grade routers are not able to handle the high traffic rates generated
by multicast mode, so using a router directly as your network switch is
discouraged. It is strongly suggested to avoid mixing your regular network
traffic with AVoIP streaming traffic and the AVoIP traffic should exist within a
separate subnet, at the minimum.