CYP CH-U331TR, Руководство по эксплуатации, Страница: 11 / 60

6
Connect the 4 bottom pins to devices with trigger activation functionality,
such as window security alarms, smoke detectors, or door buzzers, to
extend their current state to a connected transmitter/receiver.
Note: This is designed to be connected to individual trigger devices and
is NOT compatible with the Trigger Control Keypad.
6.2 Rear Panel
OUT IN DP IN HDMI IN HDMI OUT SFP LAN (POE) USB DEVICE
DC 5V
LINE
1 2 3 4 5 6 7 8
1 DC 5V Port: Plug the 5V DC power adapter into the unit and connect it to
an AC wall outlet for power. (Optional, not needed if the unit is powered
via PoE)
2
USB DEVICE Port: When in Transmitter Mode, connect directly to a PC
to extend its USB functionality to the ports on the connected receiver.
Note: This port is not active in Receiver Mode.
2
LAN (POE) Port: Connect via a Gigabit Ethernet switch to compatible
transmitter/receiver to transmit data, and to a PC/laptop to control the
unit via WebGUI.
Note: Only one network port, either the LAN or SFP, can be active at one
time. This unit can be powered directly by the connected Gigabit Ethernet
switch if it provides PoE (802.3at Type 2).
4
SFP Slot: Insert a standard SFP module, and connect the appropriate
optical cable to allow data transmission to a compatible receiver/
transmitter or to a Gigabit Ethernet optical fiber network switch.
Note: Only one network port, either the LAN or SFP, can be active at one
time. The SFP module must support a dual-optical fiber connection style,
such as LC, or be pre-terminated with dual-optical fiber cables. Single-
mode and multi-mode support is dependent on the SFP modules used.
5
HDMI OUT Port: Connect to an HDMI TV, monitor, or amplifier for digital
video and audio output.
6
HDMI IN Port: Connect to HDMI source equipment such as a media
player, game console, or set-top box.