CYP CH-U331TR, Руководство по эксплуатации, Страница: 29 / 60

24
„
Video Loss Options: Use the drop down to set the length of time to
wait for a lost source to return before showing the “Link Lost” screen.
Available options are: 3, 5, 10, 20, 30, 60 seconds, or Never Timeout.
If the “Turn off screen” checkbox is checked, the HDMI output will be
completely disabled, including sync, after the timeout time has passed.
„
Scaler Output Mode: Use the drop down list to select the preferred
output resolution for the scaler. Selecting one of the specific
resolutions will output all video at that resolution. Selecting “Pass-
Through” will output the source video at its original resolution.
Selecting “Native” will attempt to scale to the detected native resolution
of the display connected to the HDMI output.
3) Audio over IP (Transmitter Mode): The audio source to embed in the
outbound AVoIP stream is selected here. Selecting “Digital” will always
embed the current digital video’s audio source (HDMI or DisplayPort),
selecting “Analog” will always embed the Line In audio source, selecting
Auto will embed audio according to the default routing behavior (see
section 8.3.3).
4) USB over IP (Both Modes): This section provides controls for the USB
over IP extension functionality, including enabling/disabling USB support
(Receiver mode only) and enabling various USB compatibility settings.
„
Enable USB over IP (Receiver Mode Only): Unchecking this
checkbox will completely disable support for USB streaming to this
unit. This option should generally remain checked, but, if USB support
is not required, disabling this feature can save some bandwidth.