CYP CDPW-K1, Руководство по эксплуатации

Страница: 34 / 48

28
6.5 Telnet Control
Before attempting to use Telnet control, please ensure that both the unit and
the PC are connected to the same active networks.
Start your preferred Telnet/Console client, or use the built in client provided
by most modern computer operating systems. After starting the client,
connect by using the current IP address of the unit and port 23 (if the
communication port number used by the unit has not been changed
previously). This will connect us to the unit we wish to control and commands
may now be entered directly.
Note 1: If the IP address of the unit is changed then the IP address required
for Telnet access will also change accordingly.
Note 2: The default IP address is 192.168.1.50 and the default
communication port is 23.
6.6 Serial and Telnet Commands
COMMAND
Description and Parameters
help

Show the full command list.
?

Show the full command list.
help N1

Show details about the specified command.
N1 = {Command Name}
ver

Show the unit's current firmware version.
fadefault

Reset the unit to the factory defaults.
eth_fadefault

Reset the unit’s network settings to the factory defaults.